login   |    register
Eduard [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
148
Fokker E.V / D.VIII
Stropping a razor

by: Stephen T. Lawson [ JACKFLASH ]


Originally published on:
AeroScale

  • Ed_EV_Pack

Stropping a cutting edge Razor
The Fokker E.V was the last production fighter of the German Air Service in 1918. It had a troubled start with the problem being traced to poor workmanship in the wing manufacturing shops of the Fokker subsidiary. When gussets and webs were installed correctly, the plywood covered wing of the E.V met and exceeded required specifications. Redesignated as the D.VIII, ( some examples still labeled as E.V) the type soldiered on even after the end of World War One. It was fleshing out infant air forces in other countries, outwardly they were indistinguishable except by their stenciled serial numbers. The aircraft was nicknamed the ‘Razor’, due to its head-on profile, but in 1918 it was the cutting edge. It just came too late to be useful in combat.

Overview
The popularity of the E.V / D.VIII as a model subject can be traced directly to the fact that it has so little rigging. The plastic in the early Eduard kit (#8003) is a little thick and the sockets for the struts must be enlarged. But the photoetched brass and decals are killer! The Flashback kit has the Eduard plastic, but the locations of the cockpit instrumentations (in the resin tub) are laid out in reverse. There are fewer brass items as the resin is meant to combine some of these. The DML / Dragon kit has great plastic and metal parts. Use gel type super glue to give the struts a better airfoil cross-section. Also, the precut flourescent kit decals should only be used in making patterns from better grade aftermarket Lozenge decals. I recommend the Eagle Strike examples. Yet here in 2006, Eduard gives us the newest in their jewel collection. The Fokker E.V kit # 8096 has very few build concerns.

Building the new kit
This piece is about ‘Stropping a cutting edge Razor’ or putting a fine edge on the Eduard kit. Pre-drill all rigging holes. The exploded view instructions are great. The rest of the kit appears to be very well tooled. The average modeler can pick this kit up and get very decent results. It fills the void in the Fokker D.VIII line up left by DML / Dragon's neglect. as Eduard has proven they can exceed our expectations with a kit that has almost everything the modeler could want in one box. That is great plastic with two options for wing variants, optional photoetch and precut decal lozenge and a comprehensive slick paper magazine for instructions. I will refer to plastic parts as PP and photoetch as PE.

Page 1. Text and history. The history is reasonably accurate, except that Eduard has noted that about 200 E.V airframes were ordered with 289 being delivered, when actually it was closer to 335 being ordered and 289 being delivered by 8 Oct. 1918, for both the E.V & D. V.III. (See the break down-below). Also Eduard takes the time here to explain why they included a second wing in the kit. More on that on page 6.

Page 2. Express masks dealing with the colour profiles are limited to colour demarcations of the striping and wheel covers. Also there are the legend, parts map and colour references. Before beginning, wash your kit plastic in mild dish soap & water, dry completely, then pre-drill and clean up all rigging and strut locator holes.

Page 3. Begins with the seat (PP B 7), the harness assembly (PE 6 & 7 x 2) and its support assemblies (PP C 8, 30, 36). Whatever the fuselage covering use the same covering on the bulkhead/screen (PP B 5). Also the seat was known to be covered in the same lozenge fabric and was held in place by attaching it to eyelets in the seat back’s outer rim.). Then the flooring (PP B 8) and side tubing (PP C 17 & 22), column support (PP C 18 & 26), compass( PP C 16, 34 & PE 9), ammo box (PP C 1) and rear gun mounts (PP C 9 ). Aileron control horns need to be scratchbuilt - I used two of the plastic control horns (PP C 14 x 2). These are added to the lower leg of the control column (PP C 18), fine fuel adjustment and air mixture control (PE 8 or PP C 25). Also I replaced the kit control yoke (PP C 26) with a Tom’s Modelworks item for Fokker types, as the kit item looks too much like one for an Albatros fighter for my tastes. Also the fuel tank-pressure hand pump needs to be scratchbuilt. This was little more than an air pressure hand pump just to keep the fuel tank under pressure as it lost fuel to normal use.You my want to add a half loop of painted brass wire to simulate the air hose leading toward the front of the cockpit strapped to the framework.

Page 4. The rudder bar assembly (PP C 19 & 23) and tachometer (PP C 13) are applied here. I replaced the thick plastic rudder bar with a nice Copper State Models PE version. It appears that on most of Fokker’s rotary equipped aircraft that the instruments (tachometer, oil pulsator and in some cases an altimeter) were attached directly to the airframe, in the same manner as the Fokker Dr.I. If the instrument panels were installed, it may have been due to the post war sales requirements of purchasing countries. To finish, you will need to install the starter magneto (PE 2 & 16) at the pilot’s left on the upper longeron inside the cockpit of the left fuselage half (PP B 1). Installing the resulting cockpit tub into the fuselage is a snap.

The inner surfaces of the fuselage halves (PP B 1 & 2) should have the reverse pattern of the lozenge camouflage you have chosen. The triangle shaped cheek/ fuselage former’s seen on the inner surfaces as well will be a clear varnished plywood with wood or metal edge and centerline rods, that were apart of the original aircraft’s framework, paint these first. Next lay down your lozenge decal and when dry use a sharp razor knife to cut along the border of the triangle shaped formers. The result is very pleasing. Since the cockpit frame needs to fit against the inner surfaces, try a dry run first and see if you need to do any shimming between the framework and the fuselage inner surfaces. Carefully note any areas that need more work. Evergreen plastic strips can help if there are any concerns. My effort fit very well. I attached the framework to the kit fuselage sides in the upper areas where the longeron would be on the real aircraft.

After uniting the fuselage halves (PP B 1 & 2), cover the joined fuselage with the lozenge camouflage decals that you have chosen. Allow this to thoroughly dry. This type of camouflage was applied in 5 sections: One piece each for the top and sides, while the bottom was applied in two pieces. Note, none of the lozenge placement on their mating edges (for the underside center line) matched the fabric that it was adjacent to.

Page 5. The upper forward deck (PP B 14) is finely detailed. I also added the metal filler caps (PE 14 x 2). The fuel gauge (PE 13) fits well but there should be a slight over hang on the shroud (like on their Fokker D.VII kit). I scribed and reset the elevators on both of the horizontal flying surfaces (PP B 6), the Rudder and fin (PP B 11). The optional photoetch reinforcement rings (PE 24 X 12) are to be applied after you cut or scrape off the ones from the plastic surfaces. These are supposed to be “fabric.” The chin pan facade (PE 3) works well especially if you anneal it. For the exterior, the kit supplied four and five colour lozenge colours are way too light, but in an attempt to help the modeler work with what comes out of the box I will offer a fix. A wash coating of translucent dark blue and / or black tends to help greatly. I have to admit that this is one of their better efforts to provide the lozenge camouflage compared to what they have offered in the past. I prefer the Eagle Strike lozenge decals instead of the kit provided items. Their clear carrier film on the lozenge decals allows them to be easily reversed. Just apply a little decal Sol & Set.

Next add the cowling and engine (PP B 4,12 &13, PE 1). Add a small piece of plastic rod vertically to the apex of the lower longerons at the stern post. It is meant to appear like the lower end of the tube/post on which the rudder swivels. If you're going to use the rest of the photoetch pieces add only the parts that are wholly attached to the model. Wait until the last step to add any small parts that extend away from the model surface. For example lower end of the control column (PE 20) or the tail skid (PP C 5), foot step (PP C 12 ) or grab handles (PP C 3 x 2). Note the "do not glue" comment is meant for the engine stub only. The cowling is meant to be glued in place.

Step 6. Next we see the Spandau machine gun assemblies (PP C 11 & 33 x 2, PE 4, 19 & 22 x 2). If you want to have the flip up rear sights find a set of 1/72 items, they are closer to scale than any of the 1/48 sets I have seen. Then continue with the ammunition feeds (PP C 15 & 32) and the empty belt eject tubes (PP C 20 & 21). I would continue to use the control horns (PE 26 x 6). After cleaning up their sprue attachment points and painting, add the cabane struts ( PP C 2, 6, 7, 10 & 31 x 2). The photoetch retainer band (PE 23) is meant to represent the assembly that holds the cowling to the fuselage.

In reference to the second wing, I have been contemplating the manner to describe the "cupped surface option". After spray painting the wings in a light monocolour, hold them up to the light obliquely. You will see that one has smooth surfaces and the other has criss-cross ribs and spars with valleys or slight depressions between. This “dished” detail is so subtle you just don't see it in the upper or lower plan views. Not so much a starved cow but the kind of surface one would expect to see when rigid sheets or plates are tacked to a skeletal surface. Note this is not the experimental wing structure that has been suggested on another website. All substructures are at right angles. I chose the wing ( PP A 2) resembling the “dished” plywood surface. The ailerons are molded to the wing entirely, so if you're going to reset them do it before mounting on the fuselage.

Page 7. Add the footstep or hand grab bars (PP C 12 & 3 x 2). Now, to bring it all together... I use a temporary jig made from children’s Lego blocks. When completely dry, I replaced the stabilizer struts ( PP C 4 x 2). Also add the small parts that were previously discussed. Ensure that the landing gear legs (PP C 24 & 29) seat fully in the Axle Wing ( PP B 10). I replaced the plastic axle ends with brass rod of appropriate diameter. The rigging is very straight-forward. You can use the fine wire or monofilament / invisible sewing thread. I prefer smoke grey coloured monofilament.

Page 8. Adds the final bits and pieces offering the photoetch options.

Decals & Camouflage
Eduard continue to struggle with their lozenge decals colours and the four colour lozenge here is comparable with their Fokker D.VII kit decals without the speckles. It provides markings for four colour schemes, three of which have been available in either kit or aftermarket forms previously. Note also the Fokker company stencils / Logos (decals 38 - 40) were applied to the pilot’s right side only, not on both sides.

A. Fok. E.V , serial unknown. Pilot, unknown possibly from Jasta 8. Photos exist of this machine in French hands post war. The history focuses on the unit possibilities.
B. Fok. E.V serial unknown. Pilot unknown, believed to be from Jasta 36. My studies of this unit lead me to believe that the cowling may have been white or very light blue with a medium blue painted on the fuselage from the area behind the cowling back to the rear wing strut and including the wheel covers. This is just my opinion. The star has the equal dark value of the banding edges. This machine was photographed during the war and post war in British / Canadian hands.
C. Fok. E.V 183/18 Flown by Cpt. Stefan Bastyr of Polish Air Service of the 7th Squadron..
1. According to Alex Imrie this is 193/18.
2. R. Rimell’s Datafile #25, Pp. 13 & 34 says it is 183/18 and flown By Lt. Stefan Stecc of the Polish #7 “Kosciuszko” (phonetic = Ko-shew-sco) Squadron. Good images of this aircraft tell us that the whole horizontal tail plane was divided in red & white, not just the elevators.
D. Fok. E.V serial unknown Flown by Offizierstellvertreter (Officer Aspirant) Friedrich Altemeier of Jasta 24 during Sept.1918. He had been with the unit since December 1916. A true expression of the term “old bone” in a single seat fighter unit.

In recent years there has been a good deal of focus placed on the photographic evidence concerning markings and the camouflage of these types. We know that mostly, four colour Lozenge was used and that in a few cases five colour type camouflage was used. The only existing portion of a production Fokker E.V is the vertical tail unit of 149/18 ( it is in 5 colour Lozenge). The top wing was thought to be a solid dark green, but is now known to also have been streaked like the Fokker Dr.I or had patterns of the camouflage pattern streaked on at the factory levels.

Conclusion
In my opinion, Eduard’s new Laser Technology Mold is a welcome addition. A vast improvement from their first attempt (slush mold) of this subject in 1992-3. The new generation exploded view instructions are great. The average modeler can pick this kit up and get very decent results. Eduard tries to offer us everything the modeler wants in one box. That is great plastic with four options for colour schemes, optional photoetch and precut decal lozenge and a comprehensive slick paper magazine for instructions. Eduard is making high marks with their orange label kits. I note that I only replaced three kit items with what I consider better detailed or stronger pieces - these are the axle, rudder bar and control yoke.

Thank you to Eduard for kindly supplying the review sample.

Fokker’s Exodus
The myth that Fokker smuggled train-loads of aircraft out of Germany, has reached epic proportions. While we know that this was true to some extent, we must try to understand what was happening. First, we know that Germany was out of the aircraft purchasing market after November 11, 1918. It is known that of 335 that were ordered, 289 Fokker E.V/D.VIII had been delivered by 8 Oct.1918. Pending contracts could not be paid for, so the post war German government was more than willing to let Fokker leave with his rolling stock of D.VII, D.VIII and C.I types (some of these having been accepted by the German government were among those spirited away). Herr Anthony Fokker was not a war criminal, so why would the allies pursue him? The allied commission was busy destroying aircraft in the field. New aircraft at air parks ready for disbursement went to the allied countries as war reparations (mostly Fokker D.VII and Roland D.VIb types). At least twenty incomplete Fokker D.VIII type airframes were destroyed at the Fokker factory in Schwerin. At the exodus a further twenty ( 29?) complete Fokker E.V/ D.VIII types went to Holland and were sold off by the Fokker company there. Recipients were the Dutch Luchtvaart Afdeling , Polish Air Service and The United States of America (purchased P165 and P169 ?).

Fokker E.V / D.VIII, known serial numbers (/18) and the possible (?) works numbers (w/n) allocations:

100/18 - 226/18 —w/n 2741 - 2867
227/18 ------------ (w/n 2868 ?)
228/18 - 231/18 —w/n 2869 - 2872
232/18 ------------ (w/n 2873 ?)
233/18 - 236/18 —w/n 2874 - 2877
237/18 ------------ (w/n 2878 ?)
238/18 - 241/18 —w/n 2879 - 2882
242/18 ------------ (w/n 2883 ?)
243/18 ------------ (w/n 2884 ?)
244/18 --------------w/n 2885
245/18 ------------ (w/n 2886 ?)
246/18 --------------w/n 2887
247/18 ------------ (w/n 2888 ?)
248/18 --------------w/n 2889
249/18 - 251/18 --(w/n 2890 - 2892 ?)
252/18 --------------w/n 2893
253/18 - 307/18 --(w/n 2894 - 2948 ?)
308/18 - 309/18 ---w/n 2949 - 2950
500/18 - 564/18 ---w/n 3255 - 3319
670/18 - 729/18 —w/n 2672 - 2731 *

Total = 335 aircraft ordered

* The reason last series of work numbers is out of sequence is that they were originally assigned to the Fokker D.VI contract orders. When the balance of the D.VI types were canceled, the remaining work numbers were transferred to the E.V / D.VIII production series.

References
Aerodrome Modeller, Vol.3, #3, P.125.
Eindeckers of World War I by D. Pardee, Cross & Cockade USA Vol.22, #4, Pp.331-343,1981.
Fokker D.VIII by J.M.Bruce, Profile Pub. #67, 1966.
Fokker D.VIII by P.M.Grosz, Windsock Datafile #25, Albatros Pub. Ltd. 1991.
Fokker D.VIII by P.M.Grosz, World War One Aero #86, September 1980.
Fokker E.V./ D.VIII by R. Rimell, Warpaint #5 Scale Models May 1979.
Fokker Fighters of WWI by A. Imrie, Osprey, Vintage Warbirds #6, Pp.53-55, 58-59, 1986.
Fokker’s D.VIII ...Reluctant Razor by P. Grosz, Air Enthusiast 17 Pp.61-73, 1980.
Fokker D.VIII Wing and Airfoils by C. Cash et al, World War One Aero #79, May 1980.
German Army Air Service in WWI, Osprey, Vintage Warbirds #2,Pp.26-27, 1985.
Info from Dan-San Abbott, unpublished.
Pictorial History of the German Army Air Service by A. Imrie, Ian Allen Pub. 1971.
Report on the Fokker Monoplane Type E.V, Report I.M.1015 Air Ministry June, 1920.
Royal Prussian Jagdstaffel Nr.36 by S.T.Lawson, Cross & Cockade Int. Vol.20, #1, Pp. 1989.
Scale Model Aircraft in Plastic Card by H.Woodman, Model & Allied Pub., 1975.
Serendipity at Aerdrome 92' by P.M.Grosz, World War One Aero, Pp.64-66, 1993.
U.S. Air Service’s Fokker D.VIII Monoplanes by B.Flanagan, Cross & Cockade USA, Vol.16, #1, Pp.83-92, 1975. (Fokker E.V P165 and P169 were tested at McCook Field 1920-22.)
World War One in Plastic by Brad Hansen, Great Auk Pub. Pp.25,52 1979 & update 3/79.
World War One in the Air by R. Rimell, Osprey Pub. Vintage Warbirds #9, p.35,1988.
SUMMARY
Highs: Excellent plastic sprues with great details. Decals are basic and will apply to most any scheme you use.
Lows: The exception being the overly thick internal skeletals framing. The pendantic clinging to the solid olive top wing colour has been proven to be erroneous.
Verdict: Basic kit good decals buildability is high and so is the over all fit. I will buy at least three more versions of this kit for future projects.
  DESIGN & DETAILS:90%
  CAMO COLOUR:93%
  DECAL CHOICE:95%
Percentage Rating
93%
  Scale: 1:48
  Mfg. ID: 8096
  Suggested Retail: $29.95
  Related Link: Fokker E.V / D.VIII
  PUBLISHED: Apr 20, 2006
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 90.97%
  MAKER/PUBLISHER: 88.49%

About Stephen T. Lawson (JackFlash)
FROM: COLORADO, UNITED STATES

I was building Off topic jet age kits at the age of 7. I remember building my first WWI kit way back in 1964-5 at the age of 8-9. Hundreds of 1/72 scale Revell and Airfix kits later my eyes started to change and I wanted to do more detail. With the advent of DML / Dragon and Eduard I sold off my ...

Copyright ©2019 text by Stephen T. Lawson [ JACKFLASH ]. All rights reserved.



Comments

Greetings all here is a real bit of fun. Look closely . The "cupping" between the ribs and spars in the top surface of the wing does seem to be apparant. From the photo of the real machine it looks like Eduard got it very close in their most recent issue of this kit. This is a Fokker E.V post war in Belgian hands.
APR 11, 2007 - 02:27 PM
Here is a recent 1/48 build from a good fellow, Daniel Clamot from where else Belgium. It represents the machine in the above phot image. A Fokker E .V 201/18, flown by LTT Van Cotthem. Sorry folks he moved the image 2013.
APR 11, 2007 - 02:33 PM
Hi Stephen Thats a good one.do you have more pics of the machine? Lars
APR 11, 2007 - 03:39 PM
I have invited Daniel to show up here and give his comments. Known as "Scimitar " he has several images of this machine.
APR 11, 2007 - 07:41 PM
As I'm known as Scimitar on Theaerodrome but also as Draken35 on some European forums, I will be here "Draken35akaScimitar" Here are some photos of my Belgian Fokker E V: The aircraft was discovered just after the Armistice on the Evere drome. He became the personal mount of LTT Albert van Cotthem. On the first times she was seen bearing German lozenge; but circa 1921-22 the a/c was painted in khaki. The a/c was unarmed and, with the time, some haubans were added to reinforce the structure. Greetings from Belgium, Daniel.
APR 11, 2007 - 11:49 PM
Hello Lars, As a good fellow of Scimitar I will tell you that these pictures gives not justice to his model. As for the real aircraft, you'll find another photos of the real aircraft here : LINK If you are interrested in early Belgian aviation, click on this link : LINK and, when you are on the BAHA site, click on the "military aviation" link. You'll find a lot of useful photos Best regards from Belgium. Edmond
APR 12, 2007 - 02:11 AM
Review here
APR 12, 2007 - 05:18 PM
Greetings all just bringing this up for a fellow wing nut. Also see the kit review here.
SEP 08, 2007 - 08:41 AM
Thanks for bringing this one up again. It is one fantastic kit. I would reccomend it for anybody that want to get started in early aviation modeling. One of Eduards best.
SEP 10, 2007 - 10:12 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • Ed_BW_EV
    Bit of aging by Rob Karr to my image.
  • Ed_EV_Decals
  • Ed_EV_Lozenge
  • Eduard_EV_3a
    Inside detail of texturing the lozenge.
  • Eduard_EV_5a
    Side view of kit with PE
  • Eduard_EV_7aa
    Angled side view of kit with PE.
  • Eduard_EV_9a
    From the rear
  • Eduard_EV_17a
    Here are some kit items. The cowling lower edges have been thinned down a bit a well.
  • Eduard_EV_20a
    New research into some previously unknown Fokker documents has given us accurate colours for the Streaked camouflage. Here is the uppersurfaces.
  • Eduard_EV_21a
    New research into some previously unknown Fokker documents has given us accurate colours for the Streaked camouflage. Here is the undersurfaces.
  • Eduard_EV_24a
    Into the cockpit
  • Eduard_EV_25a
  • Eduard_EV_27aa
  • Eduard_EV_35a
  • Eduard_EV_36a
  • Eduard_EV_37a
  • Eduard_EV_38a