Originally published on:
Building the Revell 1:72 VIIC u-boat
Part 6: deck gun and details...The u-boat now has the shape of an actual u-boat. Time to add some more details! First of all, the deck gun. Like the 20mm, the deck gun is easy to built, and it looks cool on the deck of your u-boat. Soon after the deck gun, the safety railings, the saw at the front of the u-boat, and equipment on the deck followed. Last step is adding the cables that go from the front of the u-boat to the rear. Some patience is needed here. In total, you use 8 pieces of wire, 6 connectors between those wires and 3 points where the wire is connected with the hull. The kit has enough wire to do about 8 u-boats with so you have room for errors here. Just take your time and it will look nice!
Part 7: preparing for paint...Sunday, almost two weeks ago when I received the kit The whole u-boat has been built, and so it's time to paint and weather it. Before I started painting, I sprayed the whole u-boat in Tamiya grey surface primer. Because I had so much fun in building I decided not to paint anything during the built. If this was a good idea or not…….I’ll come back to that later!
Part 8: painting the VIIC…(4 weeks later)After working on some other projects, it was time to continue on the VIIC again. The first thing I had to do was to decide which paints to use. I like to use Tamiya Acrylics, so I ended up with the following colours: XF-63 (German Grey) for the lower hull. XF-53 (Neutral Grey) for the upper hull and tower. XF-24 (Dark Grey) for the deck. XF-1 (Flat Black) for pre-shading. I also used some colours like XF-7 flat red for life jackets, X-10 gun metal for the 20mm AA gun etc. I spray the paints with my Tamiya HG superfine airbrush, a good airbrush which I can recommend. Air comes from my Sil Air 15exp compressor, which I also like a lot! Details are painted by hand. I started with pre-shading. This is my first attempt with this technique. I used flat black for this. After this I began to paint the lower hull with German Grey. To bring some difference in colour (1 large surface in 1 colour looks a bit boring) I sprayed the lower hull a second time, now with a mix of 90% XF-63 German Grey and 10% XF-15 Flat Flesh. The propellers were painted with X-12 Gold Leaf. Once this was done I continued on the upper hull with Neutral Grey. Masking tape was used here to achieve the hard-edge look. I also painted the tower with this colour. Now it was time for the decks. After masking the hull and the tower I sprayed XF-24 Dark Grey on the main deck. The tower deck was hand painted. With all the large pieces of the VIIC painted, it was time to focus on the details. I started with the deck gun and equipment on the main deck. After that I hand painted the interior and details of the tower. The cables were hand painted with X-10 gun metal. To get back on the question: “is it smart first to built the whole kit and then paint it”….I think it’s just what you like, but if I would built another VIIC I’d paint the turret interior during the assembly, as well as the deck gun and AA gun. That makes things a bit easier.
Copyright ©2019 by Martin Noorloos. Images and/or videos also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of Armorama, KitMaker Network, or Silver Star Enterrpises. All rights reserved. Originally published on: 2005-06-21 00:00:00