login   |    register
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
Looking for ideas for what to 3D Print
amoz02t
#192
Visit this Community
Kentucky, United States
Joined: November 25, 2009
KitMaker: 1,277 posts
Armorama: 1,220 posts
Posted: Friday, March 29, 2019 - 01:23 AM UTC
Hi Mike. Hope all is well. PM sent
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Sunday, April 14, 2019 - 12:39 AM UTC
Thanks all for the concern. I'm doing well, I just haven't had the time to do anything. I've decided that I'm going to cut back on the products that I print myself. It's a lot of work, which was mostly expected, but it isn't very enjoyable for me. I'll be keeping the products that can't be printed through Shapeways available on the website. For now, the listings will stay up but I'll remove the purchase links on products that are available on Shapeways and I'll have a link to the Shapeways product instead. This isn't a decision I take lightly, I've been mulling about it for about a month.

What I will also do is offer replacement parts. If anything from purchased product from Shapeways is damaged or lost, you can contact me through Shapeways or my website and I'll print a copy of that missing part for you.

I'll also still do one-offs. Like say, for example, you wanted a 1/6 M110 SASS, I will still do that.

I'll complete the couple of orders I've received up until now but I won't be taking more orders for items that are also available on Shapeways.
Bulldog
Visit this Community
Ohio, United States
Joined: March 09, 2004
KitMaker: 32 posts
Armorama: 26 posts
Posted: Sunday, April 14, 2019 - 02:37 AM UTC


Mike,
how about WW2 German Afrika Pith helmet correct size and shape. Perhaps even the first set of dutch helmets they used. just an idea, Regards, Bulldog
amoz02t
#192
Visit this Community
Kentucky, United States
Joined: November 25, 2009
KitMaker: 1,277 posts
Armorama: 1,220 posts
Posted: Sunday, April 14, 2019 - 03:40 PM UTC

Quoted Text

Thanks all for the concern. I'm doing well, I just haven't had the time to do anything. I've decided that I'm going to cut back on the products that I print myself. It's a lot of work, which was mostly expected, but it isn't very enjoyable for me. I'll be keeping the products that can't be printed through Shapeways available on the website. For now, the listings will stay up but I'll remove the purchase links on products that are available on Shapeways and I'll have a link to the Shapeways product instead. This isn't a decision I take lightly, I've been mulling about it for about a month.

What I will also do is offer replacement parts. If anything from purchased product from Shapeways is damaged or lost, you can contact me through Shapeways or my website and I'll print a copy of that missing part for you.

I'll also still do one-offs. Like say, for example, you wanted a 1/6 M110 SASS, I will still do that.

I'll complete the couple of orders I've received up until now but I won't be taking more orders for items that are also available on Shapeways.



Hi Mike. I got your PM. Thank you- Stuart
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Thursday, June 13, 2019 - 03:15 PM UTC
I'm going to try to work on more projects at this time. I'm working full time so I won't have a huge amount of time to work on projects but I'll be able to work on them. I'll go back through the thread and see what's been suggested and try to work on that first.

Quoted Text



Mike,
how about WW2 German Afrika Pith helmet correct size and shape. Perhaps even the first set of dutch helmets they used. just an idea, Regards, Bulldog



From the looks of it, I might be able to do it, I just need the dimensions. If it's longer than it is wide, it would take a bit of working but still probably doable for me.
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Saturday, June 22, 2019 - 12:04 AM UTC
Gensets and cable reels????????


If the US Army would just switch to the HEMTT A3 hybrid electrical vehicle concept offered by Oshkosh they wouldn't need all these aux. generators! The transport tractors themselves could provide all the electrical power the missile battery might require.

If it is anything like the Tricon Containers the Shapeways print price on those Gensets would be rather high but the hose and cable reels might be useful on a number of applications such as generators, fuel trucks, water handling hippos, etc.
kaleu
Visit this Community
Indiana, United States
Joined: June 11, 2003
KitMaker: 77 posts
Armorama: 68 posts
Posted: Monday, June 24, 2019 - 05:19 AM UTC
Not sure if this has been mentioned, but how about a Polish T-55 engine deck in 1/35 scale.
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Sunday, June 30, 2019 - 11:11 AM UTC

Quoted Text

Gensets and cable reels????????


If the US Army would just switch to the HEMTT A3 hybrid electrical vehicle concept offered by Oshkosh they wouldn't need all these aux. generators! The transport tractors themselves could provide all the electrical power the missile battery might require.

If it is anything like the Tricon Containers the Shapeways print price on those Gensets would be rather high but the hose and cable reels might be useful on a number of applications such as generators, fuel trucks, water handling hippos, etc.



Do you know of any dimensions for the width and diameter? And any other pictures?


Quoted Text

Not sure if this has been mentioned, but how about a Polish T-55 engine deck in 1/35 scale.



Any good top-down pictures? Maybe someone made a conversion and they have or can make a good drawing with dims?


Also now, for you Middle Eastern equipment lovers:
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Monday, July 01, 2019 - 11:24 PM UTC
Mike, I found a reference that says the generator for the Patriot Missile Battery is the Cummins Power Generation VT28-G but my internet access to those spec pages seems to be blocked. (I have encountered this security block before when doing research on the Oshkosh HEMTT.) I will continue looking for the dimension specs.

Not sure if the above spec refers to these auxillary truck mounted generators or to the one mounted on the missile trailer itself. There seems to be different gensets being used in these various photos of the aux. generators.

EPP III Auxiliary Vehicle:


165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Monday, July 01, 2019 - 11:30 PM UTC
Sorry - not the greatest pics but all I could find.

(From Wikipedia)
The EPP-III Electric Power Plant
The EPP-III Diesel-Electric Power Plant (EPP) is the power source for the ECS and Radar. The EPP consists of two 150 kilowatt diesel engines with 400 hertz, 3-phase generators that are interconnected through the power distribution unit. The generators are mounted on a modified M977 HEMTT. Each EPP has two 100-gallon fuel tanks and a fuel distribution assembly with grounding equipment. Each diesel engine can operate for more than eight hours with a full fuel tank. The EPP delivers its power to the Radar and ECS through cables stored in reels alongside the generators. Additionally, it powers the AMG via a cable routed through the ECS.








165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Monday, July 01, 2019 - 11:31 PM UTC


There appears to be a subframe that secures the two gensets, fuel tanks and electrical cable reels. This subframe attaches to a special loadbox on the standard HEMTT. This non-standard loadbox has special fold down sides that form catwalks to allow for service access to the generators.
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Tuesday, July 02, 2019 - 12:01 AM UTC
Shown here is generator mounted on Patriot Launcher trailer - this is a different spec from auxiliary truck mounted gensets or single axle trailer mounted generators.

165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Tuesday, July 02, 2019 - 12:46 AM UTC
You might try this website for additional EPP III information:

http://generators.tpub.com/TM-9-6115-669-13P/

(Still have not found dimensional data on individual generators. Perhaps I can find it somewhere in the civilian sector covering the same genset in commercial service.)



p.s. Cable reels rotate 90 degrees when deployed.
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Wednesday, July 03, 2019 - 05:45 AM UTC
Mike, I believe, this is what you are looking for:



Diameter of Power Cable Reels appear to be just a shade under 36 inches or 91.4 centimeters.
barkingdigger
Staff MemberAssociate Editor
ARMORAMA
#013
Visit this Community
England - East Anglia, United Kingdom
Joined: June 20, 2008
KitMaker: 3,521 posts
Armorama: 3,003 posts
Posted: Wednesday, July 03, 2019 - 05:59 AM UTC
I assume those units are in inches? As a surveyor I cringe when I see numbers without units on a drawing - a mistake anyone I've trained over the years soon learned not to repeat!

3D printing these in 1:35 would be a very expensive hobby...
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Wednesday, July 03, 2019 - 10:08 AM UTC
Tom that drawing is dually-demented (as we used to say at Square D Company / Groupe Schneider) in inches and centimeters. That becomes obvious when you multiply what turns out to be the inch measurement by the centimeter conversion factor of 2.54.

(I have yet to find any statement of legend or measurement units in this manual
but I feel sure it is in there somewhere.)


Example: Generator enclosure length of 113.5 (inches) x 2.54 = 288.00 (centimeters)
barkingdigger
Staff MemberAssociate Editor
ARMORAMA
#013
Visit this Community
England - East Anglia, United Kingdom
Joined: June 20, 2008
KitMaker: 3,521 posts
Armorama: 3,003 posts
Posted: Wednesday, July 03, 2019 - 09:08 PM UTC
Well, that won't lead to confusion! Somebody must have thought it was a good idea...

Still, plenty of info for CAD work! I suspect the size rules out selling 3D prints, but it might be worth the cost of a single print to act as master for traditional casting of more affordable copies - I wonder if any of the resin companies out there are interested?
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Friday, July 26, 2019 - 10:30 AM UTC
Are you looking for the actual generators themselves or just the gensets and cable reels?
165thspc
#0
Visit this Community
Kentucky, United States
Joined: April 13, 2011
KitMaker: 8,933 posts
Armorama: 8,222 posts
Posted: Friday, July 26, 2019 - 10:42 AM UTC
Just the genset outside "boxes/enclosures".

I am guessing it would be better (cheaper) to digitally prototype one genset and then make resin molds from that. (As Tom said.)
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Friday, July 26, 2019 - 01:58 PM UTC
Ok, that does make it easier. I'll see what else I can scrounge up on it.

And for the IDF fans out there, some Tavor X95s. Two sets with handguards attached and removed. Available now.

(Yes, I forgot that long notch on the backs of the STANAGs but that was just fixed.)
Wakemeup
Visit this Community
Napoli, Italy
Joined: September 02, 2006
KitMaker: 878 posts
Armorama: 872 posts
Posted: Friday, July 26, 2019 - 02:07 PM UTC
Price and where do you sell them?any pics of the product besides cad drawing?
Cheers
Ciro
MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,207 posts
Armorama: 1,709 posts
Posted: Friday, July 26, 2019 - 02:10 PM UTC
I sell them all on Shapeways. Prices vary by model but these are $11.50 for High Detail and $14.00 for "Ultra High Detail" (unfortunately Shapeways raised their prices.) I personally don't have pictures of the sets myself because it's too expensive to order from them all the time.
terminators
Visit this Community
France
Joined: February 20, 2012
KitMaker: 1,725 posts
Armorama: 1,700 posts
Posted: Thursday, August 15, 2019 - 02:31 AM UTC
Infra red lights ?



HermannB
Visit this Community
Bayern, Germany
Joined: October 14, 2008
KitMaker: 3,641 posts
Armorama: 3,613 posts
Posted: Thursday, August 15, 2019 - 05:28 AM UTC
IR lights can be easily get from old M113 kit. I wonder if you find out the changes that need to be done on RSOV kit?
terminators
Visit this Community
France
Joined: February 20, 2012
KitMaker: 1,725 posts
Armorama: 1,700 posts
Posted: Thursday, August 15, 2019 - 06:12 AM UTC

Quoted Text

IR lights can be easily get from old M113 kit. I wonder if you find out the changes that need to be done on RSOV kit?




I have not seen if there are seat belts for driver and passenger seats.

It seems there are lights behind the mesh of the bumper but I don't know how they are fixed.