_GOTOBOTTOM
Armor/AFV: Modern - USA
Modern Armor, AFVs, and Support vehicles.
Hosted by Darren Baker
Verlinden Collabsible fuel drums?
HermannB
Visit this Community
Bayern, Germany
Joined: October 14, 2008
KitMaker: 4,099 posts
Armorama: 4,067 posts
Posted: Tuesday, January 02, 2018 - 06:01 PM UTC
Does anyone know if the collabsible fuel drums or fuel bladders survived the crash of Verlinden Productions and might be available someday´s. I speak of course of the 1/35 scale one. I found recently that these drum could be transported with PLS/LHS systems.
white4doc
#429
Visit this Community
Massachusetts, United States
Joined: October 14, 2003
KitMaker: 1,086 posts
Armorama: 964 posts
Posted: Tuesday, January 02, 2018 - 06:34 PM UTC
They may have, there was a conversation on Facebook during the late summer about the Verlinden line by people in a position to know. I don't want to go into detail on the board since the conversation was in a closed group on Facebook.
Bravo36
Visit this Community
Arizona, United States
Joined: January 11, 2002
KitMaker: 247 posts
Armorama: 229 posts
Posted: Tuesday, January 02, 2018 - 06:48 PM UTC
Try searching on eBay. There is a lot of Verlinden product still available on that site from small sellers. Good luck!
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, January 02, 2018 - 07:26 PM UTC

Quoted Text

I found recently that these drum could be transported with PLS/LHS systems.



Do you have any pics of this set-up? I didn't think we still used these. I recently acquired a set and could use them w/my PLS.
Frenchy
Visit this Community
Rhone, France
Joined: December 02, 2002
KitMaker: 12,719 posts
Armorama: 12,507 posts
Posted: Tuesday, January 02, 2018 - 07:43 PM UTC
Looks like some are/were still used in Afghanistan :



H.P.
HermannB
Visit this Community
Bayern, Germany
Joined: October 14, 2008
KitMaker: 4,099 posts
Armorama: 4,067 posts
Posted: Tuesday, January 02, 2018 - 07:52 PM UTC

Quoted Text


Quoted Text

I found recently that these drum could be transported with PLS/LHS systems.



Do you have any pics of this set-up? I didn't think we still used these. I recently acquired a set and could use them w/my PLS.



Found a pic on DVIDS site. These are drums for potable water, but shouldn`t make a big difference in 1/35 scale.

Here you go...


https://www.dvidshub.net/image/1444832/water-purification-specialists-make-magic-liquid-so-fresh-and-so-clean
HermannB
Visit this Community
Bayern, Germany
Joined: October 14, 2008
KitMaker: 4,099 posts
Armorama: 4,067 posts
Posted: Tuesday, January 02, 2018 - 07:59 PM UTC
M1 flatrack announced from MMK.

http://www.mmk.cz/en/models/category/pripravujeme
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, January 02, 2018 - 08:23 PM UTC
Nice pics. Good to know.
azadro
Joined: September 24, 2007
KitMaker: 47 posts
Armorama: 46 posts
Posted: Tuesday, January 02, 2018 - 11:53 PM UTC
as far as I know they were 1/48 scale only.....
zapper
Visit this Community
Skåne, Sweden
Joined: October 18, 2005
KitMaker: 745 posts
Armorama: 734 posts
Posted: Wednesday, January 03, 2018 - 12:09 AM UTC

Quoted Text

as far as I know they were 1/48 scale only.....



They released both 1/35 and 1/48 sets.

Cheers,
/E
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Wednesday, January 03, 2018 - 03:59 AM UTC

Quoted Text

They released both 1/35 and 1/48 sets.



The 1/35 set is #386. It contains only one fuel drum, the pump, filter, hose, fittings, and dry transfer markings.



The 1/48 set is #454 and includes two drums and the rest of the above items.

LeoCmdr
Visit this Community
Alberta, Canada
Joined: January 19, 2005
KitMaker: 4,085 posts
Armorama: 3,917 posts
Posted: Wednesday, January 03, 2018 - 05:07 AM UTC
Ah, the coveted Verlinden 1/35 Collapsible Field Re-Fueling set.

I have a couple of the 1/35 sets stashed away for an Aussie Vietnam Centurion Mk.5/1 diorama.

18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Thursday, January 04, 2018 - 11:41 PM UTC
Sometimes it's not about the thing you photograph. It's about what's behind the thing you photograph.

18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Tuesday, June 23, 2020 - 02:33 PM UTC
These are far better looking than Verlinden's old offering:

https://www.bnamodelworld.com/fuel-drums-scenics-diorama-mmk-mmk-rz35053?zenid=89c0c5cd803c69c1bed5e9870a9c2e8c
panzer7
Visit this Community
United Kingdom
Joined: July 27, 2008
KitMaker: 7 posts
Armorama: 7 posts
Posted: Tuesday, June 23, 2020 - 07:12 PM UTC
On the MMK website they have fuel bladders plus a flexible tank
trickymissfit
Joined: October 03, 2007
KitMaker: 1,388 posts
Armorama: 1,357 posts
Posted: Wednesday, June 24, 2020 - 07:54 AM UTC

Quoted Text

Looks like some are/were still used in Afghanistan :



H.P.



ah yes the good old blivit! There were two or three sizes used in the sixties, and they came with either brass or stainless steel valves on the end. Fuel bladders were always brass! Water could be either one. Then there was a shut off valve the was attached after landing on the ground. Half the time it was lost. Fuel drums also had a hose that would fit onto the bladder. Most tanks had the hose stored in their gear somewhere. You'd die if you knew how the got the diesel fuel into the gas tank!
gary
KurtLaughlin
Visit this Community
Pennsylvania, United States
Joined: January 18, 2003
KitMaker: 2,402 posts
Armorama: 2,377 posts
Posted: Wednesday, June 24, 2020 - 08:27 AM UTC

Quoted Text

They may have, there was a conversation on Facebook during the late summer about the Verlinden line by people in a position to know. I don't want to go into detail on the board since the conversation was in a closed group on Facebook.



Posted 2-1/2 years ago about events several months before. I guess they're not coming anytime soon.

KL
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Wednesday, June 24, 2020 - 08:39 AM UTC
Aside from my latest post somewhat answering H-H's question with a whole new, better product, why does it bother you that it's an old post? These new blivets are much nicer, have metal inserts, and come with decals rather than the dry transfers that Verlinden had to provide two sets of because they anticipated people having problems with them. Perhaps like others I should just continue to create new threads every time a though pops into my head...

At any rate, Milan is sending mine this week, so I guess they're available after all,
galactica
Visit this Community
Milano, Italy
Joined: April 11, 2008
KitMaker: 146 posts
Armorama: 126 posts
Posted: Wednesday, June 24, 2020 - 09:35 AM UTC
Many years ago I used the Verlinden set in 1/48 in a diorama with a Huey by Esci.



KurtLaughlin
Visit this Community
Pennsylvania, United States
Joined: January 18, 2003
KitMaker: 2,402 posts
Armorama: 2,377 posts
Posted: Wednesday, June 24, 2020 - 10:04 AM UTC
18Bravo wrote:


Quoted Text

. . . why does it bother you that it's an old post?



I'm guessing this is directed at me, but I don't know why because I quoted the post I was addressing and it was not one of yours. Not everything is about you.

I was commenting on the guy hinting - in 2018 - that the Verlinden set may re-appear. It hasn't, and probably won't. Perhaps people ought to accept the fact that the Verlinden stuff is not coming back.

KL
18Bravo
Visit this Community
Colorado, United States
Joined: January 20, 2005
KitMaker: 7,219 posts
Armorama: 6,097 posts
Posted: Wednesday, June 24, 2020 - 10:15 AM UTC
Really? Not about me? I guess that was someone else who resurrected this old thread. Nice try. I guess you and your Bobbsey twin like throwing the same tired phrases around. Oh, have a nice evening.
KurtLaughlin
Visit this Community
Pennsylvania, United States
Joined: January 18, 2003
KitMaker: 2,402 posts
Armorama: 2,377 posts
Posted: Wednesday, June 24, 2020 - 02:45 PM UTC

Quoted Text

Really? Not about me? I guess that was someone else who resurrected this old thread.



Again, not what I was commenting about in my first post, or what I reiterated in my second post, so I still can't understand why you engaged me, but I'm glad you got to feel included.

KL
white4doc
#429
Visit this Community
Massachusetts, United States
Joined: October 14, 2003
KitMaker: 1,086 posts
Armorama: 964 posts
Posted: Thursday, June 25, 2020 - 02:19 AM UTC

Quoted Text


Quoted Text

They may have, there was a conversation on Facebook during the late summer about the Verlinden line by people in a position to know. I don't want to go into detail on the board since the conversation was in a closed group on Facebook.



Posted 2-1/2 years ago about events several months before. I guess they're not coming anytime soon.

KL



Apparently they're not. Apparently the custodian of the masters decided that they weren't worth re-releasing. That was my comment your snarky response references, nowhere did I say that the line was coming back. At the time I was aware who had the masters, that they were in good hands and safe (not in a landfill as rumored) and being evaluated to determine which were going to economically worth re-releasing. I didn't have any input into those decisions, I was factually reporting what I had seen (and anyone else who was a member of that group as well). Your knowledge base is great, Kurt and you're willing to share it and I'm sure you're a decent person but there are times when you come across as a jerk on line. This is one of them.
KurtLaughlin
Visit this Community
Pennsylvania, United States
Joined: January 18, 2003
KitMaker: 2,402 posts
Armorama: 2,377 posts
Posted: Thursday, June 25, 2020 - 04:34 AM UTC

Quoted Text


Quoted Text


Quoted Text

They may have, there was a conversation on Facebook during the late summer about the Verlinden line by people in a position to know. I don't want to go into detail on the board since the conversation was in a closed group on Facebook.



Posted 2-1/2 years ago about events several months before. I guess they're not coming anytime soon.

KL



Apparently they're not. Apparently the custodian of the masters decided that they weren't worth re-releasing.



So pointing out an acknowledged fact makes me a jerk?

To my knowledge none of the ex-Verlinden stuff has re-emerged. It is not getting better physically or relative to newer competing and superseding products as time goes on. I doubt we'll ever see their items again. Is it wrong to say that?


Quoted Text

. . . nowhere did I say that the line was coming back.



Agreed.

There is a wide gulf in meaning and certainty between "saying the line was coming back" and what I actually wrote:". . . . hinting - in 2018 - that the Verlinden set may re-appear." A hint is not a commitment or firm statement; "may" is a statement of mere possibility. A suggestion of a possibility, in other words. Doesn't that match what you said in 2018 pretty well?


Quoted Text

Your knowledge base is great, Kurt and you're willing to share it and I'm sure you're a decent person but there are times when you come across as a jerk on line. This is one of them.



A lot of people online - and don't take this as directed at you, John - do something useful 1% of the time and are moronic 99% of the time, so I guess for most folks in the audience we average out in the end.

KL
Kevlar06
Visit this Community
Washington, United States
Joined: March 15, 2009
KitMaker: 3,670 posts
Armorama: 2,052 posts
Posted: Thursday, June 25, 2020 - 07:27 AM UTC
I believe I’ve read somewhere selected Verlinden Items are being re-released, but can’t remember who’s doing it. I do know Sprue Brothers has cornered the Verlinden market with over 500 items in their catalog, including the 1/48 Blivet set, which is currently in stock:

https://store.spruebrothers.com/searchresults.asp?searching=Y&sort=7&search=Fuel&show=90&page=1&brand=Verlinden

I remember being on the using end of these temporary “gas stations“ more than once.
VR, Russ
 _GOTOTOP