_GOTOBOTTOM
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
Armorcon 2018 Call for judges
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Friday, August 31, 2018 - 08:41 AM UTC
Hi All,
Armorcon 2018 is fast approaching on September 28-29, 2018. For more info on the show itself, go to: http://www.nemilmod.org/default.htm . Last year things worked pretty well, so since it isn't broken, we're not going to try to fix it. First, my sincerest thanks to all attendees who allowed the judges to work unimpeded with the doors open at last year's event. I think everyone appreciated this change and we'll be doing it again this year. Second, model handling will be the same as last year. In order to facilitate the public being able to view the maximum number of models at any given point, the models will be moved from the Ram-Rod table to the model room, with the tray underneath them. The model will then be moved from the model room to the “pit” and back when it is judged. If it still has a tray under it, the model has not been judged, please give the judges time to get to it. Third, we will continue with Category XVI: Classic kits. This is defined as: Out of the box only, 25 years or older, must show proof with instruction sheet. If you have any questions, email me to discuss it. Last, since the AMPS International was nearly a month later than usual this year, we will be accepting models that competed/won at that show this year. So if you don't have anything ready since May, have no fear, we will accept that entry at Armorcon.
In addition, I'd like to turn your attention to the Special Awards we have for this year:

American Heroes
Best 911 (Rescue)
Best Commonwealth Subject
Best Diorama
Best Figure
Best German
Best Junior
Best Ordnance
Best Russian/Soviet
Best Scratchbuilt/ Conversion
Best Sci-fi / Fictional
Best Sherman
Best Small Army
Best U.S.
Best USMC
Best Weathering
Missing "E" Award
Silk Purse Award (formerly the "Rolls Royce" Award)
Show Theme
People's Choice
Best in Show

Please make sure you check the boxes on your forms in order to be considered eligible for award(s). Some of these awards are donated by various people/businesses and groups, so take a moment to see if your model qualifies. Hey, you never know!
WE NEED JUDGES! For those of you who have attended the extravaganza, you’ll remember we have had 250+ models at this show. For the AMPS system, that requires 4 judges for every piece, that’s a lot of man-hours. If you are coming and you are competing, I would strongly suggest you consider a judging tour. They’re 60 minutes long this year, down from 90 last year. We'll see how this goes. Any assistance will help us out a lot and it doesn't have to be judging, if you aren't comfortable doing that. There are a bunch of other tasks that need doing including ACJ's, runners, data entry and Ram-Rod. The judge’s meeting is at 9:00 am on Friday and 8:00 am on Saturday. Traditionally, a “thank you” for the judges has been first crack at the vendors. However, this will ONLY be done on FRIDAY morning. Ideally, I’d like to have manpower for 4 tables to start the show (16 judges and 2 runners). So please, if you are planning on coming to the show the night before, and staying at the hotel, I’d really appreciate it if you would come and lend a hand early on. As this worked so well last year, I'm turning to the web to sign-ups for working the show: I have created a sign-up sheet for helping out at the show. Just follow this link: here and you will be good to go. You can sign up at your leisure and I’ll be able to print it out before the show, with the available slots left for the taking at the judge’s meeting on the respective days.
Next, if you are interested, we will be having the Judge’s Certification class and Table Captain class on Friday night (time TBD). If you would like to become a certified judge, please let me know and I’ll talk to Mike Petty to set up the class. We will only be running these classes if there are enough people PREREGISTERED beforehand, so if you want to do this, please contact me to pass you along to Mike. Otherwise the class may not be held due to lack of interest.
I'm going to beat a dead horse here, because I say this every year. Thankfully most people have "gotten it" and there haven't been too many instances of this recently. There is a note of etiquette and courtesy to your fellow competitors and show staff I’d like to bring up. In the past, we have had people who brought a lot of models for competition and then did not help with the show. While this works fine at an IPMS-style judging arrangement, it is death for an AMPS show. It effectively floods the judges with models and gives no additional manpower to move entries through the system. In past years we had judges who sat for 3 hours straight. It is unfair to ask them to do it again. If you don’t feel qualified to judge (for whatever reason), there are plenty of administrative jobs to be done in running the show.
So, to recap: go to the link above and pick out the available time(s) you want to judge or work at the show. Also, if you would like to be enrolled in the Judge’s certification class, please let me know. I look forward to seeing everyone on the 28-29th of September and I look forward to working with you at Armorcon 2018.
Regards,
Georg Eyerman
Chief Judge Armorcon 2018
[email protected]
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Wednesday, September 05, 2018 - 03:58 AM UTC
Bump
Regards,
Georg
j76lr
Visit this Community
New Jersey, United States
Joined: September 22, 2006
KitMaker: 1,081 posts
Armorama: 1,066 posts
Posted: Wednesday, September 05, 2018 - 09:52 AM UTC
how many vendors are coming . Any idea ?
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Wednesday, September 05, 2018 - 10:06 AM UTC
17 confirmed right now.
Regards,
Georg
j76lr
Visit this Community
New Jersey, United States
Joined: September 22, 2006
KitMaker: 1,081 posts
Armorama: 1,066 posts
Posted: Wednesday, September 05, 2018 - 10:10 AM UTC

Quoted Text

17 confirmed right now.
Regards,
Georg



thanks .
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Saturday, September 08, 2018 - 03:22 PM UTC
Bump.
Regards,
Georg
MrNeil
Visit this Community
New Jersey, United States
Joined: November 01, 2005
KitMaker: 266 posts
Armorama: 262 posts
Posted: Sunday, September 09, 2018 - 08:34 AM UTC
Current list of vendors is here:

http://www.nemilmod.org/armorcon/armorcon-vendors.htm

Neil
fhvn4d
#159
Visit this Community
Massachusetts, United States
Joined: April 07, 2008
KitMaker: 803 posts
Armorama: 564 posts
Posted: Sunday, September 09, 2018 - 12:28 PM UTC
Georg, Ill be available pretty much all day friday. Just not sure if my arms gonna work yet, so I am not putting in for anything.
bill_c
Staff MemberCampaigns Administrator
MODEL SHIPWRIGHTS
Visit this Community
New Jersey, United States
Joined: January 09, 2008
KitMaker: 10,553 posts
Armorama: 8,109 posts
Posted: Monday, September 10, 2018 - 07:08 AM UTC
Only if I can phone in from Japan....
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Wednesday, September 12, 2018 - 02:27 PM UTC
Bill,
Maybe via Skype?
Georg
TheGreatPumpkin
Visit this Community
New Jersey, United States
Joined: April 20, 2009
KitMaker: 690 posts
Armorama: 672 posts
Posted: Sunday, September 16, 2018 - 03:56 PM UTC
Bump.
Georg
j76lr
Visit this Community
New Jersey, United States
Joined: September 22, 2006
KitMaker: 1,081 posts
Armorama: 1,066 posts
Posted: Sunday, September 30, 2018 - 08:20 AM UTC
I went to the show Friday ! decent amount of vendors .wasn't many contestants in the show room yet , but I imagine Friday later and Saturday it got better. I, like a lot of us, go for the vendors, and to look at the finished models in the show room. it was pretty good this year. not as good as some but better then the last few !
fhvn4d
#159
Visit this Community
Massachusetts, United States
Joined: April 07, 2008
KitMaker: 803 posts
Armorama: 564 posts
Posted: Sunday, September 30, 2018 - 12:38 PM UTC
Huge shout out to the folks who took a ride in the Judges Pit!!!
Sandbox
Visit this Community
Connecticut, United States
Joined: October 29, 2002
KitMaker: 350 posts
Armorama: 158 posts
Posted: Monday, October 01, 2018 - 01:10 AM UTC
Thank you to everyone who attended, shopped, judged or participated in anyway.
 _GOTOTOP