Armor/AFV: Modern - USA
Modern Armor, AFVs, and Support vehicles.
Hosted by Darren Baker
M920 MET w/M870A1 trailer WIP
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, March 24, 2020 - 11:55 PM UTC
Thanks for looking guys. I have seen the Hasegawa one but, as mentioned, it is much smaller than what the military uses and what I wanted to depict.
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Sunday, March 29, 2020 - 04:37 AM UTC
The excavator is done, except for weathering. I rerouted the hydraulic lines so they would be more accurate than they were. I added a few pieces of tubing to complete them as well. I made all the markings and decals for it myself by copying images off the net and printing them on computer decal paper. I think it came out nicely.






I fully detailed the cabin as well with extra levers and a small instrument panel, placards, etc. It is hard to see, but it is all there.



I found a CAT image on the net that replaced the "A" with a girl bending over. Knowing soldiers, that is exactly what one would put on his vehicle. So I added some overspray around it and tagged the excavator.


The truck and trailer also have been base coated. I need to camo them and they will be ready for decals and weathering as well. More to come soon since I plan on working on it a lot and finishing it up soon during the Covid-19 Apocalypse lock-down.
Quartercav
Visit this Community
Hessen, Germany
Joined: February 06, 2014
KitMaker: 64 posts
Armorama: 64 posts
Posted: Sunday, March 29, 2020 - 10:54 AM UTC
Great work! Hopefully we can see the complete truck soon!

Stay healthy!

Andreas
Kenaicop
#384
Visit this Community
Nevada, United States
Joined: August 23, 2005
KitMaker: 1,426 posts
Armorama: 1,316 posts
Posted: Sunday, March 29, 2020 - 11:19 AM UTC
Haha! Love it Gino!
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Sunday, March 29, 2020 - 12:06 PM UTC
Thanks guys. I figured the "CAT Girl" stencil would be a hit. The truck is almost done. I should have another update in a couple days.
MakiWawa
Visit this Community
Warszawa, Poland
Joined: December 17, 2014
KitMaker: 448 posts
Armorama: 448 posts
Posted: Sunday, March 29, 2020 - 06:56 PM UTC
CAT
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Thursday, April 02, 2020 - 02:27 AM UTC
I have completed this project.

First, I changed the bumper numbers on the excavator since they really couldn't be read well being black on dark green. I added a sand surround so they would be more visible, just like the Army does. I also weathered it with a wash of a dirt brown color and some selective rust and bare metal.






For the truck, I painted it in NATO camo and marked it as a vehicle in IFOR (UN Implementation FORce, Bosnia-Herzegovina in '95-'96). I also added the yellow RAWS (Rotating Amber Warning Signal) on the roof and red/yellow reflectors as per European regulations on the rear mud flaps. I added the airlines and brake wiring cable from thin wire and strapped the spare wheel to the frame in front of the 5th wheel. I weathered it in a similar way as the excavator, just a little lighter handed. I wanted some weathering to show details, but not to cover them up.








Some close-up details.




For some contrast, I painted the trailer in overall medium green and weathered it similar to the excavator, just a little heavier to represent a very well used trailer.




Here it is all hooked up together. I have the correct chain binders to tie-down the excavator, but am waiting on some chain to arrive. So it will have to be tied down later. It is quite large when all hooked up.






This was a very rewarding build to me. I really enjoyed the scratch work on the truck and was pleasantly surprised with the excavator. I really like how it turned out. Now to make room on the shelves for it.
RobinNilsson
Staff MemberTOS Moderator
KITMAKER NETWORK
Visit this Community
Stockholm, Sweden
Joined: November 29, 2006
KitMaker: 6,693 posts
Armorama: 5,562 posts
Posted: Thursday, April 02, 2020 - 02:30 AM UTC
ummm ...
Wouldn't the excavator arm be folded somehow to reduce the height?

Impressive build!
/ Robin

Example:


Edit: Folding the arm also lowers the centre of gravity and this may be relevant when travelling at some speed ....
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Thursday, April 02, 2020 - 02:49 AM UTC
Thanks. Sure, it can be. Like I said, it is not tied down yet and the arm is still movable.
namengr
Visit this Community
Illinois, United States
Joined: September 01, 2014
KitMaker: 332 posts
Armorama: 328 posts
Posted: Thursday, April 02, 2020 - 02:56 AM UTC
Morning Gino, very nice build. Minor point, if the machine has been in use the teeth and side cutters on the bucket, along with some of the surface would be shiny bare metal from wear. From experience the paint doesn't last long. Any way love to see heavy equipment as a retired operator. Wayne
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Thursday, April 02, 2020 - 03:25 AM UTC
Thanks for checking in. I actually did put silver on the teeth. I just doesn't show well in the pics.
HermannB
Visit this Community
Bayern, Germany
Joined: October 14, 2008
KitMaker: 4,099 posts
Armorama: 4,067 posts
Posted: Thursday, April 02, 2020 - 07:29 AM UTC
The arm is definitly folded down during railroad travelling.

https://armorama.kitmaker.net/features/6524
KoSprueOne
Visit this Community
Myanmar
Joined: March 05, 2004
KitMaker: 4,011 posts
Armorama: 1,498 posts
Posted: Monday, August 10, 2020 - 01:47 PM UTC
I'm glad you posted this link in the, Construction Vehicles for Dioramas??? thread.
This looks great.




2CAVTrooper
Visit this Community
Alabama, United States
Joined: October 21, 2005
KitMaker: 310 posts
Armorama: 302 posts
Posted: Monday, August 10, 2020 - 04:00 PM UTC
Looks awesome Gino.
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, August 11, 2020 - 12:02 AM UTC
Thanks guys. Hopefully it was/is helpful.

I plan to get back to finishing this by securing the load soon. I was waiting for the chain to come in the mail (which basically stopped from overseas due to Covid shutdowns). While I was waiting, I put it on the shelf and started something else. I now have the chain and binders; just need to install them. More to follow.
m75
Visit this Community
California, United States
Joined: July 20, 2002
KitMaker: 666 posts
Armorama: 661 posts
Posted: Tuesday, August 11, 2020 - 01:51 AM UTC
A double-handful to move, that's for sure. I'm about to add the NATO camo to my HET and trailer, and find that even in two parts, it's intimidating to wrestle on the workbench. Especially with the large amount of PE scattered all over the kit.

I think it's time for another Tamiya M151A1, just to settle my nerves a bit......
jfeenstra
Visit this Community
Alberta, Canada
Joined: April 24, 2014
KitMaker: 342 posts
Armorama: 342 posts
Posted: Tuesday, August 11, 2020 - 02:16 AM UTC

Quoted Text

Thanks guys. Hopefully it was/is helpful.

I plan to get back to finishing this by securing the load soon. I was waiting for the chain to come in the mail (which basically stopped from overseas due to Covid shutdowns). While I was waiting, I put it on the shelf and started something else. I now have the chain and binders; just need to install them. More to follow.



Great job! But take Robin's advice about the excavator boom and stick being folded down on the trailer as per his picture. I've been doing this for 30 years, and I have yet to see an excavator anywhere hauled on a highway truck with anything other then it folded down. It would just be to unstable otherwise, even if the height was OK.
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Tuesday, August 11, 2020 - 03:11 AM UTC
I have since folded the boom as much as the model will allow. I had to lengthen the rod on the upper piston to allow it to fold more. I will have pics soon of it folded and securely chained down.
jfeenstra
Visit this Community
Alberta, Canada
Joined: April 24, 2014
KitMaker: 342 posts
Armorama: 342 posts
Posted: Tuesday, August 11, 2020 - 10:05 AM UTC

Quoted Text

I have since folded the boom as much as the model will allow. I had to lengthen the rod on the upper piston to allow it to fold more. I will have pics soon of it folded and securely chained down.



Robin's pic also gives a good example of chaining it down - short tail chains and binders at the four corners. The other option is cross-chaining at the rear (i.e. the view shown in the pic), running a chain from the track on one side to the tie down point on the other. That's hard to do at the front of the trailer when the load is right up to the trailer neck (which you want to get more weight on the drive wheels) so the short tail chains at the corners are usually the simplest option.

And your operator is obviously following orders - most guys wouldn't bother putting out the trailer deck side extensions! As long as about 1/3 to 1/2 of the track width is on the trailer, good to go (again, as per Robin's pic)!
JmeDubya
Visit this Community
California, United States
Joined: July 25, 2013
KitMaker: 124 posts
Armorama: 124 posts
Posted: Sunday, August 16, 2020 - 12:07 PM UTC
It turned out amazing Gino. The excavator looks great too. Always wondered how some of the die cast 1/35 construction stuff would look painted and detailed.
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Sunday, August 16, 2020 - 12:55 PM UTC
Thanks Jon and Jamie. I hope to have some pics of it all tied down soon.
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Sunday, August 23, 2020 - 08:10 AM UTC
I finally got to properly tying down the excavator. For the chain binders, I used 3D printed ones designed by our own Matt Leese (mdlbldrmatt135). You can get them at his Down Range Productions Shapeways store. They look really nice. I chained it down on all four corners and chained down the bucket. I folded the boom as far down as it would go without cutting it up and redesigning the whole thing. I did have to replace and lengthen the upper piston to make it go as far as it is.






namengr
Visit this Community
Illinois, United States
Joined: September 01, 2014
KitMaker: 332 posts
Armorama: 328 posts
Posted: Monday, August 24, 2020 - 05:32 AM UTC
Looks really good Gino, having the boom down makes it look very realistic. 'Course I'm a sucker for anything with construction equipment. Wayne
JmeDubya
Visit this Community
California, United States
Joined: July 25, 2013
KitMaker: 124 posts
Armorama: 124 posts
Posted: Monday, August 24, 2020 - 06:50 AM UTC
Just awesome!
HeavyArty
Visit this Community
Florida, United States
Joined: May 16, 2002
KitMaker: 17,694 posts
Armorama: 13,742 posts
Posted: Monday, August 24, 2020 - 07:14 AM UTC
Thanks guys. Glad you like it. I am very pleased with how it turned out.