IntroductionAWZ P70 Limousine
is a new type from Herpa.
It is a new addition in their Nostalgia of GDR
and Vintage car
From 1955 to 1959, the Trabant predecessor was produced in three different body variants in Zwickau. The vehicle with a plastic body heralded the era of mass motorization in the former GDR. - Herpa
Herpa debuted this model as the cover story Pioneering of Materialnot – AWZ P70
in their April 2015 issue of Der MASS:STAB. You can see this issue via the link Click here for additional images for this review
, below. A review of the AWZ P70 Kombi
is available through Related Link
, in the summary box at the end of this review.
The AWZ was the first design constructed of Duroplast, a form of plastic containing resin strengthened by wool or cotton. The duroplast was made of recycled material, cotton waste from Soviet Union and phenol resins from the East German dye industry, making the Trabant the first car with a body made of recycled material.
DKW - Das Kleine Wunder (The small wonder). The renowned German carmaker's pre-war type F8 equipped with a two-stroke engine became the archetype of all East German family cars.
The Zwickau Automobile Factory (AWZ) continued the production of the F8 and an updated version, the F9 after the War under the authority of the Soviets and then the East Germans.
At the early '50s it became crystal clear that these models were outdated. In 1953 production of the F9 was transferred to Eisenach, where EMW and later Wartburg production commenced.
At Zwickau, inside the Automobile Werke Zwickau (AWZ) a new model was developed, called the P70 (P for plastic and 70 for the displacement which is about 700 cc).
AWZ P70 This car was the first German small car made with plastic body. The name of the material was Duroplast made out of resin, strengthened by wool.
The AWZ P70 debuted at the 1955 Leipzig Fair. Its engine was based on the old F8: two-cylinder, two-stroke, 690 cc, 22 bhp. With this engine the car which weighed 820 kg had a max. speed of 90 km/h. A three-speed asynchronized gearbox was fitted which transmitted the power to the front wheels. The mechanical components were plain F8, but the powerplant was rotated by 90 degrees and placed further the front axle. So the wheelbase should've been lengthened by 220 mm. This resulted in better handling.
Beside the "Limousine" body style a "Kombi" estate and even a coupé was offered. During its four year production life about 30 thousand cars were built.
In the meantime from 1957 on, a new updated model was on the market: the P50. This car carried the "Trabant" badge for the first time - it was selected from various ideas submitted by factory workers.
AWZ P 70 Limousine
This model is fully assembled and packed in a light plastic form-fitted tray, surrounded by Herpa's red paper label, and secured in a light plastic box with opening ends. Although the plastic is flexible and the packaging appears quite flimsy, it has allowed several models to survive the perilous international postal journey, arriving in a crushed box and damaged packaging unscathed!
Molding is flawless and the model is assembled without any visible blemishes or flaws. Doors, hood and panels are defined with fine recessed lines. The door handles are slightly raised. A separate side view mirror is factory-applied to the driver side. The grille indentions are deep and closed.
The windshield is free of distortion.
Underneath the car is a single-piece with basic molded detail.
Soft tires around detailed hubcaps support the model.
Detail and Trim
Headlights are clear lenses although the brake lights are painted on.
Detail inside the passenger compartment is good: dashboard; steering wheel; seats. The seats have the pleated design of the era. This detail can be seen through the clear windows.
Exterior detail is painted on, like the gas cap, Zwickau Automobile Factory logo, and chrome trim.
Finish and Markings
Released in weinrot
/ wine red, the finish is smooth and shiny. Chrome is painted on. Herpa does not use decals.
AWZ P 70 autos ushered in a "peoples'" vehicle in the Deutsche Demokratische Republik. Herpa's HO model AWZ has clean molding and sharp printing - a nice model. I appreciate the clear headlamp lenses. The separately added side mirror is really nice. All that printed chrome is top notch, too.
Overall this is a neat and well molded model of an important vehicle for modelers of the GDR and unified Germany. It should be a must-have for model railroaders of Cold War Europe.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on
 Pal Negyesi. T R A B A N T.
[Web.] http://www.team.net/www/ktud/trabi.html. 25 December, 2004.