by: Ian Barraclough [ ]
IntroductionI bought the Modular Workshop after seeing reviews here on the Armorama forums and more recently in Model Military International magazine, which both gave good reviews. My modelling area is an old computer desk, currently furnished with an assortment of plastic tool drawers and a large tool ‘organiser’ bought in Germany. I decided to take the plunge and order some modules to tidy up the workbench. I measured the desk and drew a scale plan on graph paper. Following this I went on the Hobby Zone website and got the dimensions of each of the units I required. I decided not to get paint stands, as my paints are stored in a cabinet under my desk and I’m happy with this. After drawing out some plans I ordered the following items:
- OM01 - Drawers Module x 6 (2)
- OM02 - Drawers Module x 3 (2)
- OM03 - Corner Drawers Module
- OM04 - Corner Shelves Module
- OM05u - Bottles Module (2)
- OM07 - Brushes and Tools Module
- OM06u - Corner Bottles Module
- OM08 - Paper Towel Module
- OM09 - Showcase WIP Module
- OM11 - Ending Corner Drawers Module (4)
- OM12 - Ending Corner Shelves Module (2)
ReviewI placed the order on a Friday afternoon; it arrived on the following Thursday – great service from Hobby Zone and UPS and at only £12 flat postage a good deal too. The order arrived in one large box, with each individual module being packed in its own cardboard box and bubble wrap. In the box was my receipt, a free Hobby Zone pencil and a couple of free Hobby Zone stickers. Each individual module is well labelled with its title and opens along the top flap allowing you to keep all items together whilst working. The instructions are well printed and easy to understand; think Ikea for modellers – if you can put a 1/35 Tiger or T-55 together you’ll have no problems here. One area to watch out for is the drawers with clear windows: there is a very shallow notch in one side of the drawer sides to allow the window to sit flush – I missed this and had to pull a few of my drawers apart to get the windows in. You’ll need some wood glue – I used an economy brand and a cheap paint brush for ease of control; I also used wet wipes to tidy up glue overspill caused as the parts went together.
On completion the modules link together with strong magnets. A handy tip is to remove all the magnets from the boxes – line them up so that they are all connected and aligned by their poles. Then mark one side of the ‘top’ magnet with a permanent marker pen, remove it and continue to do the same with all of the individual magnets. This will ensure that you’ll know which side of the magnet is which when fitting – I’d also strongly suggest fitting the magnets before starting assembly. They are a very tight fit and need a tap with a plastic mallet, quite difficult to do when the module is assembled. Each module takes a slightly different time to put together: about 5 minutes for the top corner units; about 15-20 minutes for the 6 drawer units. I worked over one day in three sessions and easily completed all the modules allowing them to dry overnight.
ConclusionQuick and relatively easy to assemble, the magnets hold the modules together very well and once linked the whole workshop feels very solid. The larger draw units have dividers which can be customised, or left out if you need a larger space. I’m going to customise the OM05u bottles module by drilling different sized holes in the white shelves and making at least one of them into a rotary (Dremel) tool stand. I may also make the second one a file and tweezers holder, amongst other tools as well.