MINIART [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
135
Modern U.S. Tank Crew
Modern U.S. Tank Crew
  • move

by: Darren Baker

Introduction

Modern tank crews are few and far between as it has not been an area that was catered too except by the resin manufacturers. Move forward to today and MiniArt has taken on this issue by releasing and announcing a series of modern armour crews, the latest release in this vein is a Modern U.S. tank crew in 1/35th scale.

Review

This offering from MiniArt is provided in the usual end opening carton favoured by MiniArt where figure releases are concerned. The front of the carton provides the product details and shows the five figures in the offering in the stances that the figures do look to be in at this point; I raise this as MiniArt has been lambasted in the past for not matching images to the product. The rear of the box shows the same images of the figures with parts numbered and a digital camouflage painting scheme.

Inside the carton is a single plastic bag that contains five sprues in reality as each figure has its own sprue. First impressions of the mouldings is that MiniArt has gone to a lot of effort to provide good natural crease detail to the uniform and to my limited knowledge an accurate uniform, the body armour looks good on the four figures where it is present. It is my understanding that the UCP ‘Universal Camouflage Pattern’ known to most of us as digital camouflage is or has been replaced with OCP ‘Operational Camouflage Pattern’. The uniform as indicated covers a time period from the 2005/6 to the present day, I believe the uniform began to be distributed in 2005. The helmet and microphone detail also looks good.

The only thing shown in the images that is not in the box is the communications cables, but these can be easily added with fine wire and that will look far better than plastic ever could scale wise. The hands are all depicted with gloves in place and this has made the hands look a little large, but the detail is good for injection moulded plastic. The faces are hidden for the most part as all but one is wearing glasses or goggles that have been moulded as part of the head; I am torn as to whether these would have been better represented with clear plastic.

The only thing I am not pleased with at this point is that there are quite heavy seam lines on a number of parts verging on being identified as flash in some places, this being a new mould this bothers me as it indicates that the mouldings may deteriorate with future releases unless this is a one off issue. Moving to the positive I see no reason why these figures should not be used in just about any US Army military vehicle. The poses as indicated offer a series of nice relaxed poses that still look appropriate.

The Build

I have built two of the figures in order to assess the fit of the parts. The first of these is D that is stood upright with one arm resting on a hatch surround or similar. The figure was easily removed from the sprue, but you must take care or you could easily remove details that could prove difficult to replace. I have altered the placement of the left arm to one I prefer and I am pleased with the joint it has created. The rest of the figures parts do not fit together that well and I am at a loss as to why this should be. I cleaned the parts well and even tried shaving the mating points, but the joints will still require filler to achieve a pleasing result.

The second figure I tackled was figure A and this one is as chalk to cheese when compared to the other. The pose is that of a figure leaning against a surface with a hand raised as if eating or talking into a microphone, I have found this pose very pleasing visually. The fit of parts is very good with very little work required at the joints. I found the clean up of this figures parts far easier than the other and this may to some extent be due to the lack of body armour on this figure. The seam lines still needed to be tackled, but they were not as pronounced as on the other figure.

I have placed these two figures on the Academy Abrams as this provides a scale background for them. The figures have not been specifically designed for this model and so will need some help when placing them and platforms will need to be added.

Conclusion

I am very pleased with this offering from MiniArt due to the small number of modern armoured crews offered and the pleasing stances offered. The detail offered is of a high standard and should meet with everyone’s approval. On the downside the seams are rather large for a new release and the fit of parts on one of the assembled figures is disappointing as well. With all that said no-one said this hobby was always easy and the effort will be worth the potential result.
SUMMARY
Highs: some very pleasing poses in this offering from MiniArt.
Lows: Some seam lines verging on flash and poor fitment on one of the figures assembled.
Verdict: Well worth picking up in order to add some life to your armour.
  Scale: 1:35
  Mfg. ID: 37005
  PUBLISHED: Jun 11, 2018
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 0.00%
  MAKER/PUBLISHER: 0.00%

Our Thanks to MiniArt!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

Copyright ©2021 text by Darren Baker. All rights reserved.



Comments

I'm working on them right now to finish some commission builds. I will post some pics later.
JUN 11, 2018 - 07:06 AM
Gino I am pleased to learn that the seams/flash are a one off situation in the set I have.
JUN 11, 2018 - 07:57 AM
Always a welcome addition to any kit -but what? No big boobs in a muscle shirt?! How disappointing...NOT.
JUN 11, 2018 - 11:32 AM
The US Army set that Darren is reviewing can be used on just about any Modern US Army armored vehicle; Abrams, Bradley, M1117 ASV, M9 ACE, etc., etc... They are very versatile.
JUN 12, 2018 - 01:53 AM
Loving those Marines but the Army tank crew still look like the poor cousins......just look awkward.
JUN 12, 2018 - 02:44 AM
I got this set last week. Currently I work on a M1A1 Tusk 1 and thought these can ideal figures to make a simple base/dio for my Abrams. So I have been waiting for these a long time to be released. All what I can say, I am very dissapointed. Bigger seams and flashes like a T-Rex, poor quality and the fitting is horrible...ohh Boy!! I am a very patient man and its pretty rare if I give up on something, but at this kit I gave it up immediately. I dont say noone can make these figures but for this money I paid the quality and fitting is not acceptable for me. Compared to some Masterbox kits, the fitting and quality of MB is way better. And the price is slightly cheaper or the same. So I am sad right now. I may build these figures on day but not now I am afraid....
JUN 14, 2018 - 10:22 PM
My set had a bit of flash and some seams, nothing a few swipes with a fresh blade couldn't handle with ease. I had to do a bit more clean up with these than I did with the USMC tank crew, they came out fine. Just take your time.
JUN 15, 2018 - 12:37 AM
Flex-i-file is your friend. These figures are more than worth a little filing. Could be worse, once upon a time white metal figures had huge seams and that took a lot of filing and ate up files and rasps.
JUN 15, 2018 - 01:49 AM
Here are 4 out of the 5 figures from the set. I used Cross Delta ACU decal sheets for two of them.
JUN 15, 2018 - 02:51 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT