BISON DECALS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Challenger 2 MBT in Iraq decals

by: Pawel Krupowicz [ VODNIK ]

introduction

The set is packed in a heat sealed plastic bag with a small decal sheet (67 x 130mm) and folded instruction sheet inside. Instructions are printed (or photocopied to be exact) on one side of a single A4 paper sheet and folded in such a way that one quarter of the sheet becomes a "cover" illustration for the set. As no decal numbers are printed on the decal sheet itself, there is a decal placement diagram printed in instructions. Instructions are quite clear regarding the placement of decals and include a list of references (mainly Internet addresses) and a template to make front turret Combat Identification Panels.

Decals were printed by Microscale and are up to usual standard offered by this company. There are just minimal color register problems visible on Union Jacks, but all decals are useable. Decal film is very thin and glossy. As with other Microscale printed decals, also here the use of their Set and Sol decal setting solutions is recommended.

Three featured tanks (according to instructions) are:

A. <11B> Royal Scots Dragoon Guards, Iraq 2003

B. [40] 2nd Royal Tank Regiment, Iraq 2003

C. [41] Royal Scots Dragoon Guards, Iraq 2003

All three tanks were painted in overall sand color.

According to information on instruction sheet "all the decals are individually created from photos" and I easily found pictures of two of those tanks in my collection - my guess is that Bison used the same photos as their references. Both photos however show only the right hand side of each tank, so either Bison managed to find some additional photos, or they just took educated guesses about markings on other sides of those tanks.

Markings for tank <11B> (option A) are also included in Tamiya Challenger 2 (Desertised) kit, but there are some small differences between Tamiya and Bison markings. For example Bison show the black stripe on both the upper and lower side of the gun barrel, while Tamiya gives decal only for the top of the barrel. On my relatively low resolution photo of this tank, it looks like Tamiya decal is more accurate here. Another difference is the shape of Rampant Lion insignia - Tamiya provided very nice and detailed decal for it, while Bison decal hardly looks like lion at all. On the other hand the photo of real tank, while not clear enough to show details of this insignia, shows that the general shape of it seems more accurate on Bison decal. So it is very likely that marking on the real tank indeed only remotely resembled traditional Scottish Rampant Lion. There are also differences in markings on the rear of the tank (e.g. completely different vehicle registration numbers), but without reference photos I cannot say which markings are more accurate.

For the tank featured as the second option on the decal sheet (option B) I also found one reference photo, but high resolution one this time. Again I cannot comment on accuracy of markings on the front and rear of the tank, but markings on the right hand side seem to be reproduced accurately, with one possible exception - there is a small white warning label included in the Bison set for thermal exhaust shrouds of this tank, but my photo does not show such label on this particular vehicle. The problem with Bison set concerning this decal option however is not in decals themselves, but in instructions. The tank is described as belonging to 2nd Royal Tank Regiment, but I believe it is not true. The "Flanders" name painted on the side of the tank is a Royal Scots Dragoon Guard battle honor, not 2nd RTR one. Also the "penguin head" painted on the side of the turret of this particular tank was probably supposed to be a head of Napoleonic eagle from RSDG badge. So this tank most likely belonged to RSDG, not 2nd. RTR. UPDATE: It looks like Bison were right - it was RTR tank. The penguin head is actually a "falcon head" of Falcon Squadron and it indeed carried "Flanders" name. Maybe RTR fought there as well?...

There are three extra decal included on the sheet, not used for any of three options. These are two extra exhaust shroud warning labels and one red jerboa in a black rectangle insignia of 7th Armoured Brigade. While it is not shown in instructions, I wouldn't be surprised if one (or both) of tanks in options A and C had such insignia attached to the TOGS front door, as this was common practice on RSDG vehicles.


in conclusion

Bison decal sheet is quite interesting, although somewhat redundant for owners of Tamiya Challenger 2 kit, who already have decals for one of three featured tanks (option A) and also decals for a tank with very similar markings as those in option C in Bison set. Decals are however much better than those included in Trumpeter Operation Telic Chally 2 kit, so I can recommend them for these models.

Many thanks to Bison Decals for the review sample

For a list of Bison resellers and distributors, visit Bison Decals website.
SUMMARY
Bison Decals are a company specializing in small scale (1/72 & 1/76) armor decals, but recently they introduced several 1/35 decal sets to their offer. One of those sets is reviewed here small decal sheet for British Challenger 2 tanks in Iraq 2003 war. There are markings for three tanks included in the set.
Percentage Rating
70%
  Scale: 1:35
  Mfg. ID: 35007
  Suggested Retail: US $8.00
  Related Link: Bison Decals website
  PUBLISHED: Jul 29, 2004
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 82.20%
  MAKER/PUBLISHER: 86.86%

About Pawel Krupowicz (Vodnik)
FROM: WARSZAWA, POLAND

As first lines of this bio appear under all my reviews, I feel it is important that I start with this information: In March 2005 I ventured into the other side of modeling "industry" - I was not only building model kits, but also helping design them as a consultant for Dragon Models Ltd.. These days...

Copyright ©2021 text by Pawel Krupowicz [ VODNIK ]. All rights reserved.


   
ADVERTISEMENT


Photos
Click image to enlarge
  • bd-35007-4
    Very minimal color register problems are visible on the Union Jack. Text on exhaust shroud label is represented by black dots.
  • bd-35007-2
  • bd-35007-3
    A close-up of one of marking options.
  • bd-35007-1
    Instruction sheet.
  • bd-35007-0
ADVERTISEMENT