ACCURATE ARMOUR [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

First Look Review
135
T-34/122
Egyptian T-34/122 SPG
  • move

by: Hilbert Zuijdendorp [ HILBERT ]

Introduction

The T-34/122 is an Egyptian conversion of the well known T-34/85 tank. For this conversion Egypt used the very powerful D-30 howitzer which has been used by several countries. The turret has made the biggest makeover of the tank. By welding steel plates on to the existing turret, the turret was widened and the height was increased to store the bigger gun. The T-34/122 was also called the T-122.

The box

The kit by Accurate Armour is well packed in a sturdy cardboard box approximately 16.5 cm in length, 12.5 cm wide and 6.5cm deep. On top of the box there is a picture of the finished model along with the kit number and description along with the address on the side of the box

Contents

There are not many parts in the box. A reason could be that the turret part isn’t broken down into multiple parts. There are 57 green grayish parts to complete the model. A small PE fret is also included in this conversion to replace some lower hull parts from the Dragon kit. As stated before there are not many parts included, but they are molded without any visible air bubbles. The turret is the largest part and there is some flash on it that has to be removed with a sharp knife. The other parts are consisting of the barrel with its muzzle brake, fuel tanks and some other parts.

The barrel part is slightly bend but some hot water will do the trick. The muzzle brake is also molded in resin instead of white metal as stated in the manual. But for its complexity this part is molded extremely well and just some flash on the inside has to be removed. But for those who want a very detailed aluminum barrel, I would advise the RB model D-30 barrel. The casting blocks are quit small. So removing them shouldn’t be a real problem.

There are also parts provided for the fuel tanks. Those in the Dragon kit are from another type. Other parts included are the hatches and hooks. The rest of the parts are for the 122 mm gun.

The manual

The manual contains 2 A4 sheets printed in colour. But just one of them is the actual manual. On the front the model is presented in its completed form. The next page tells the builder about the hazards of resin. There are several warnings present/repeated here, a list of tools you need and an explanation on how to handle the kit parts. On page 3 there is the actual manual to build this kit. These are not illustrations, but actual photographs of the model in its building stages. Pages 4, 5 and 6 are just like page 3. On page 7 there is explanation of the photographs. Page 8 is a list of the parts included in the kit.

Conclusion

This original conversion from Accurate Armour is also one that would do well on the shelf. Details are nicely done and because its low amount of parts, it would be an easy kit for a modeler who hasn’t tried a resin conversion. The is some flash visible on parts but nothing that cannot easily be removed with a sharp knife. Accurate Armour did provide a barrel with muzzle brake. But it would be advisable to use the RB Model D-30 gun instead. This would definitely be a nice addition to an already beautiful kit.
SUMMARY
Highs: The few parts in the kit are cleanly molded. Even for the less experienced modeller this kit appears to be an easy build. Original subject
Lows: The huge amount of flash. The barrel isn't straight. The kit is quite expensive for the amount of parts.
Verdict: This kit would definitely look really well on your shelf. It appears it would be an easy build, so even for the less experienced modellers this would be a nice subject to build.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: C069
  Suggested Retail: €45,-
  PUBLISHED: Jul 30, 2010
  NATIONALITY: Egypt / لعربية
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.67%
  MAKER/PUBLISHER: 88.57%

About Hilbert Zuijdendorp (HILBERT)
FROM: ZUID-HOLLAND, NETHERLANDS

Well, About me. I started building models when I was eleven. But since 2004 I build seriously models. Nowadays I try to build models with some scratch or photo etch. An other hobby of mine is playing drums. Currently I study Facility Management on the Hogeschool Rotterdam.

Copyright ©2021 text by Hilbert Zuijdendorp [ HILBERT ]. All rights reserved.



Comments

looks cool, but a metal barrel would have been nice!
AUG 01, 2010 - 07:10 AM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT