login   |    register
Campaigns: Completed Campaigns
Campaigns that are completed should be grouped here.
Hosted by Richard S.
20 Bucks for the win
TankManNick
Visit this Community
California, United States
Joined: February 01, 2010
KitMaker: 462 posts
Armorama: 457 posts
Posted: Monday, February 23, 2015 - 12:53 PM UTC
Here's the unstarted sprue shot:





I've been taking a close look at this model and it looks like a great little kit! Only the two part barrel will need careful attention. The supplied brass wire might be too thick for the tow cables. I know - big deal right? The clear film for the 'scopes might be tricky. Has anyone had experience with that? I'm assuming right now that I will be painting the inside of the scopes black and put this film in the front. Kinda did the same thing on an Italeri Panther once. As far as I can tell right now it looks accurate, so this will probably be an OOB build - not so entertaining I know but there you go! (Might be best for a first campaign vehicle build.) Will have fun with dust and weathering though. Now I just need to clear some stuff out the way so I can start! Might be a while I'm afraid...
AnalogKid
Visit this Community
Texas, United States
Joined: December 20, 2014
KitMaker: 46 posts
Armorama: 42 posts
Posted: Monday, February 23, 2015 - 05:13 AM UTC
Greetings Everyone,

Here with my initial post for this campaign. I just finished up on Friday over in the WoT campaign and will now be tackling this kit and when time permits working on a crew figure over in the Improve Your Figures campaign simultaneously.

I picked the Panzer III K by Dragon. Yes, I know, Panzer IIIs seem to be all over this site but I don't have one yet in my personal collection. Plus, I found this kit at my LHS on the consignment shelf for $20 - perfect! When I saw it (a month or two ago) I immediately thought of this campaign.

Below are two pics: one showing the price tag on the box before the plastic came off and the second showing all the sprues, just cleaned...ready to go. I'll be doing this one straight out-of-the-box in order to keep it to $20.



Yeti01012001
Visit this Community
England - North West, United Kingdom
Joined: July 28, 2005
KitMaker: 360 posts
Armorama: 334 posts
Posted: Monday, February 23, 2015 - 03:09 AM UTC
Here is a couple more shots of my entry,just starting the first part of the weathering process




Bluestab
Visit this Community
South Carolina, United States
Joined: December 03, 2009
KitMaker: 2,157 posts
Armorama: 1,906 posts
Posted: Monday, February 23, 2015 - 01:59 AM UTC
I'm still in with CyberHobby's 1/35 SA-9 Gaskin. I built the BRDM-2/3 kit in its Dragon form back in the 90s. The apparent differences are the missile related stuff and the retractable wheels...the SA-9 doesn't have them. I'm undecided between doing an Iraqi vehicle or a Cold War Soviet vehicle. I've been feeling nostalgic of late so I might do the Cold War one.



I'll probably start one day this week. I have to catch up on a couple of things on the workbench.
nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Sunday, February 22, 2015 - 01:54 AM UTC
Nice progress chaps.
Had to swith to something stronger than beer as I was comparing the Heller Somua with the pics I took at Bovington... probably will join you with pics tomorrow.

@Gary. Yeah, know the struggle. Ive build one of those some time back, the stiffest tracks I ever used. I tied them around the sprocket with some wire, just to break them a few days later by dropping it...
stoney
Visit this Community
British Columbia, Canada
Joined: October 16, 2006
KitMaker: 461 posts
Armorama: 399 posts
Posted: Saturday, February 21, 2015 - 11:14 PM UTC
quick coffee and Tamiya rattle can grey primer, found a few seams and areas to hit.
stoney
Visit this Community
British Columbia, Canada
Joined: October 16, 2006
KitMaker: 461 posts
Armorama: 399 posts
Posted: Saturday, February 21, 2015 - 09:46 AM UTC
Gary, that looks awesome so far.
I managed to get some solid time in on the Chieftain, I finished the construction and scratched my head, 16 steps and you've got a chunk of plastic in the rough shape of a tank. I did make a mantlet cover out of apoxie sculpt as it just looked far too empty as it was.

Time for a shot of primer!
And Fabian, a few more brews and everything evened out nicely
Eric.
Yeti01012001
Visit this Community
England - North West, United Kingdom
Joined: July 28, 2005
KitMaker: 360 posts
Armorama: 334 posts
Posted: Friday, February 20, 2015 - 10:51 PM UTC
My entry for 20 bucks for 20 campaign. I got this from amazon for 9, still have 11 to spend.

This is the 1/35 Italeri LVT (2) Saipan. Very easy kit to put together, the only slight difficulty is putting the wheels and sprocket together.




nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Friday, February 20, 2015 - 10:24 PM UTC

Quoted Text

I thought that the campaign rules said that the kit and other accessories need only be bought for less than the equalivant of $25 USD or whatever the amount in other currencies. If he had bought it for less than $25 in his native currency, I don't see why it can't be included? If the spares cane with the kit or if it's coming out if his spares box, then that would be fine, wouldn't it?



Absolutely, the problem is (if I got that right) the conversion kit was less then 20USD, not including the Dragon kit. Litterally using half of another kit, is a bit more than a "some spares"... hence the Dragon kit should have been calculated in the entire expenses. But how much of it?
As I sated somewhere before, if youre not aware of the price you bought it, you can go with current market value. In this case, a kit with simmilar to Dragon Imperial "quality", partially started, almost 20 years old... which (on a scecond thought) cant be that much, although can be still blow the budged.

As Marek said, "the boundaries of this project are soft", especially in such cases. If you read my first statement, I hope I made clear that I havent banned it from taking part, just expressed my reservations.

@Marek: It would be perfectly fine to me, if youd choose to enter with your strange T-34... Actually Id like to see it beeing build.
How about you use the left over hull and turret and surprise us with a second T-34 sunken in mud? Something like that?

MikeyBugs95
Visit this Community
New York, United States
Joined: May 27, 2013
KitMaker: 2,210 posts
Armorama: 1,712 posts
Posted: Friday, February 20, 2015 - 08:47 PM UTC
I thought that the campaign rules said that the kit and other accessories need only be bought for less than the equalivant of $25 USD or whatever the amount in other currencies. If he had bought it for less than $25 in his native currency, I don't see why it can't be included? If the spares cane with the kit or if it's coming out if his spares box, then that would be fine, wouldn't it?
RivetCounter
Visit this Community
Warszawa, Poland
Joined: October 26, 2012
KitMaker: 54 posts
Armorama: 51 posts
Posted: Friday, February 20, 2015 - 07:31 PM UTC
Fabian, you are not convinced by my choice and I understand it. The boundaries of this project are soft, so this is why I put the question to you. It might be better if I start with a crappy TK-S or TK-3 tankette and I will keep this mutated T-34 for another campaign

Marek
nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Friday, February 20, 2015 - 03:51 PM UTC

Quoted Text

Is it OK for this campaign, or it sounds to expensive?



Marek, as I said before, using "some spares" is ok. It only seems you got a pretty full box...
Its a bit of a grey area, indeed. Not shure what to "calcuate" for the Dragon kit...
Im tempted to allow it, hope thats ok for everyone.
Looking forward to your build then.


@Eric: Have you tried fixing it with another beer?
stoney
Visit this Community
British Columbia, Canada
Joined: October 16, 2006
KitMaker: 461 posts
Armorama: 399 posts
Posted: Friday, February 20, 2015 - 06:47 AM UTC
My 1970's Tamiya Chieftain still in the plastic. Tonight Its drink beer, turn up the tunes, cut and glue vintage styrene!


Wow, one beer and the world turned sideways... Ill work on getting some better pics in
RivetCounter
Visit this Community
Warszawa, Poland
Joined: October 26, 2012
KitMaker: 54 posts
Armorama: 51 posts
Posted: Friday, February 20, 2015 - 05:20 AM UTC
I'm already in the expensive project (Going Whole Hog!! Campaign). Taking a part in this project could be a healthy counterbalance.
Fabian, I've a doubt about my kit. I'm not quite sure if it will stick to the rules.
Few years ago I've bought on eBay an incomplete (and partly broken) set of Yugoslavian T-34 Vozilo A.

I'm pretty sure that it cost me less than 20$. Otherwise I wouldn't buy it.
To finish this tank, I would use lower hull and a whole suspension from DML T-34/85 (6810 Chinese volunteer).


Is it OK for this campaign, or it sounds to expensive?

Marek/Mark
hofpig
Visit this Community
England - South East, United Kingdom
Joined: March 04, 2007
KitMaker: 1,329 posts
Armorama: 1,016 posts
Posted: Thursday, February 19, 2015 - 04:43 PM UTC

Quoted Text

I've just used the Archer resin transfer weld lines. They'd be very good for those long flat welds but cost-wise may take you over the limit.



I have a pack I bought when they first came out no-idea what I paid though!

Stretched sprue might do, never tried it so maybe I'll try using my pyro tool as they cast most of them, as plain bar on the kit! The worst missing one is the one that should be around the rear armoured pieces covering the rear wheels. Nice big semi-circular welds completely missed off, very wide and rough, maybe I'll do that one in filler.

The other intresting thing will be the paint job. Period pics being b/w make the cammo colours hard to read. Reference of the real one in Poland and the repro one in another Polish museum show the same style of cammo but in different colours! One is grey with brown stripes and the other(the repro I think) is light grey with a darker grey stripe as is also the illustration on the Toro models 1/72nd resin version.

Paul
nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Thursday, February 19, 2015 - 04:39 PM UTC

Quoted Text

I've just used the Archer resin transfer weld lines. They'd be very good for those long flat welds but cost-wise may take you over the limit.



If so, stretched sprue came a long way...

Have fun chaps. I guess it will still take some time time until I can enter...
barra733
Visit this Community
England - South West, United Kingdom
Joined: January 03, 2015
KitMaker: 282 posts
Armorama: 255 posts
Posted: Thursday, February 19, 2015 - 03:57 PM UTC
I've just used the Archer resin transfer weld lines. They'd be very good for those long flat welds but cost-wise may take you over the limit.
hofpig
Visit this Community
England - South East, United Kingdom
Joined: March 04, 2007
KitMaker: 1,329 posts
Armorama: 1,016 posts
Posted: Thursday, February 19, 2015 - 02:43 PM UTC
Well Guy's it's definatly the 20th here so I'm going to make a start on my entry.



Only opened for the purpose of doing a review, here....

http://armorama.kitmaker.net/modules.php?op=modload&name=Reviews&file=index&req=showcontent&id=10672



Just for a laugh here is the proof of what the kit cost!



I don't think it'll take that long to build but adding all the welds will!

Paul
tigersix
Visit this Community
Christchurch, New Zealand
Joined: August 08, 2003
KitMaker: 12 posts
Armorama: 10 posts
Posted: Thursday, February 05, 2015 - 11:56 AM UTC

Quoted Text


Quoted Text

Wondering if this campaign is gaining any steam...


Sorry, Ive been quite busy in the last few days... but Im trying to put more coal in the oven

I think Eric nailed it: "I say $25 covers it all up to the paint, simple. What ever deal you can score for that is what you go with"



So Id come up with that:
Whatever kit you can find for less than 25$, 20, 20 or a simmilar ammount of your favourite currency, can take part.

Youre allowed to use some spares, plasic card and evergreen, same as what you need for scartching (which is highly encuraged)
All your paints and weathering solutions can be used, without calculating them in.


Usual campaign rules apply:
one award per person, kit must be less than 10% started on the first day, at least a photo of the unstarted kit and 3 in-progress in the campaign therad, one completed in the gallery...


Youre fine with that?
I think we have to exclude figures only, and anything smaller than 1:48, simply for the reason that it isnt that hard getting a kit retailing below our limits... or is there some interrest here, that we have to set an extra limit for that kind of builds? Im quite longe gone out of the small scale business...





Well I'm looking to get in on the action, as a member of Armorama for some time it's time I added some content on this site, so forgive me if I stuff up in the posting etc etc, As a Kiwi my expenditure is around (US25)$33.63NZ. Great as I purchased a Tamiya Super Pershing for NZ$25, This may allow me one possible upgrade, maybe a turned barrel??? cheers Les
Removed by original poster on 02/06/15 - 06:47:11 (GMT).
Sheridan551
Visit this Community
Maryland, United States
Joined: December 29, 2014
KitMaker: 7 posts
Armorama: 5 posts
Posted: Tuesday, February 03, 2015 - 06:29 PM UTC
I'm in. Decided to do my first campaign as an oddball since I needed to fill my cart with something. So I'm doing a Chinese Type 83 SPG with a PE detail set for $22.

We'll see how I do at this armor thing given I've built aircraft most of my life.

Matt
bm4247
Visit this Community
Scotland, United Kingdom
Joined: December 29, 2014
KitMaker: 88 posts
Armorama: 60 posts
Posted: Monday, February 02, 2015 - 11:28 PM UTC
Thanks Fabian.

It is the 1/48 bur was not sure it qualified as a true AFV which the campaign sits in.

I will look forward to taking part.

Cheers

Brian

nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Monday, February 02, 2015 - 08:24 PM UTC

Quoted Text

"Does the Jackal count as the right type of build for this campaign?".



My Question is: why not?
Its the 1:48 kit, right? So youre within the scale range and under the price limit... abslutely no problem here.
There is no right or wrong here, as long as your kit qualifies.
bm4247
Visit this Community
Scotland, United Kingdom
Joined: December 29, 2014
KitMaker: 88 posts
Armorama: 60 posts
Posted: Monday, February 02, 2015 - 07:40 PM UTC
Hi guys,

I need some advice here.

I managed to pick up an Airfix Forward Assault Group kit, which contains a Supacat Jackal for 8.99 and some PE for the Jackal for 9.99 both direct from Airfix.

I know I am under the 20 mark but the question is, "Does the Jackal count as the right type of build for this campaign?".

Thanks

Brian
nng-nng
Visit this Community
Bayern, Germany
Joined: October 22, 2013
KitMaker: 380 posts
Armorama: 376 posts
Posted: Friday, January 16, 2015 - 04:23 AM UTC
I must have bought it in the last two years from an other modeller, he sold me some other kits aswell I wasnt that hard to add another 10 bucks for this kit. It was still the only Somua on the market... But as I leared with quite a few other kits, waiting for a new state to the art kit is sometimes faster than building an old dog.

I actually have equipped the Heller R35 with those HobbyBoss tracks, which are made for the H39. They are a bit wrong for the R35, but completely wrong for the S35. As the Somua is slightly longer youd most probably need two of these sets aswell, from my experience (H39 & Cromwell) there arent that many extra links in those packs.

I could buy the the Friuls (ATL-67) but tossing another 30 on a 10 kit desnt make too much sense to me, even without the Tamiya kit in sight. But anyway, I guess there will be more options with the Tamiya kit in the shelves, if its just taking the rubber tracks from Tamiya to upgrade it with something else.
But still more than half a year left until I really have to decide on that issue