_GOTOBOTTOM
Armor/AFV
For discussions on tanks, artillery, jeeps, etc.
REVIEW
Rivets
CMOT
Staff MemberEditor-in-Chief
ARMORAMA
Visit this Community
England - South West, United Kingdom
Joined: May 14, 2006
KitMaker: 10,954 posts
Armorama: 8,571 posts
Posted: Saturday, November 26, 2016 - 06:09 PM UTC
The Czech company Plusmodel has released several sets of rivets that will certainly see some use among detailers. These resin pins are molded in sets of fifty, and sold in packages of 250. I received two sets for review.


Link to Item

If you have comments or questions please post them here.

Thanks!
Taeuss
Visit this Community
Manitoba, Canada
Joined: January 03, 2016
KitMaker: 3,791 posts
Armorama: 3,778 posts
Posted: Sunday, November 27, 2016 - 08:47 AM UTC
These will prove very useful in an upcoming project that I've been planning on building involving a heck of a lot of Evergreen sprue!
BillieJean
Visit this Community
Colorado, United States
Joined: January 17, 2015
KitMaker: 32 posts
Armorama: 28 posts
Posted: Thursday, December 01, 2016 - 10:44 AM UTC
What Material Resin, Plastic, Printed???
CMOT
Staff MemberEditor-in-Chief
ARMORAMA
Visit this Community
England - South West, United Kingdom
Joined: May 14, 2006
KitMaker: 10,954 posts
Armorama: 8,571 posts
Posted: Thursday, December 01, 2016 - 03:30 PM UTC
These are resin.
tankmodeler
#417
Visit this Community
Ontario, Canada
Joined: March 01, 2004
KitMaker: 3,123 posts
Armorama: 2,539 posts
Posted: Monday, December 05, 2016 - 01:45 AM UTC
While these look perfectly well formed, the fact that you can get about 150 Grandt Line or Tichy Trains rivets, in styrene, for $2.50-$3.50 makes resin rivets a bit expensive for larger projects.

That these are resin also means that you _must_ use either CA or epoxy to secure them to all models, whereas the styrene Grandt or Tichy rivets can be attached to styrene kits or scratchbuilt components with your favourite liquid cement. Frankly that's more than enough reason to not use resin rivets or bolts without the monetary inducement.

If you like resin rivets, I'm sure these are a fine product, but there are other rivets out there that have significantly more utility and are cheaper to boot.

Paul
RobinNilsson
Staff MemberTOS Moderator
KITMAKER NETWORK
Visit this Community
Stockholm, Sweden
Joined: November 29, 2006
KitMaker: 6,693 posts
Armorama: 5,562 posts
Posted: Monday, December 05, 2016 - 02:01 AM UTC

Quoted Text

While these look perfectly well formed, the fact that you can get about 150 Grandt Line or Tichy Trains rivets, in styrene, for $2.50-$3.50 makes resin rivets a bit expensive for larger projects.

That these are resin also means that you _must_ use either CA or epoxy to secure them to all models, whereas the styrene Grandt or Tichy rivets can be attached to styrene kits or scratchbuilt components with your favourite liquid cement. Frankly that's more than enough reason to not use resin rivets or bolts without the monetary inducement.

If you like resin rivets, I'm sure these are a fine product, but there are other rivets out there that have significantly more utility and are cheaper to boot.

Paul



Many of the Grandt-line bolts and rivets I bought years ago had the heads off-centered from the shaft but maybe they have improved since then .....
It's a riveting topic though ....

Grand Line has rivets in three sizes:
0.032, 0.043 & 0.063 inches (that's 0.81, 1.09 and 1.6 mm for you fans of the metric system out there)

Plus Models have sizes 0.5, 0.6, 0,7, 0.8, 0.9, 1.0, 1.2 and 1.4 mm.

Tichy Trains have the inch-sizes: 0.020, 0.025, 0.030, 0.035, 0.04, 0.05, 0.06, 0.07 and 0.08 (multiply with 25.4 to get the mm sizes)

Depending on the size you need you may need to choose the approriate manufacturer ...

/ Robin
Headhunter506
Visit this Community
New York, United States
Joined: December 01, 2007
KitMaker: 1,575 posts
Armorama: 1,509 posts
Posted: Monday, December 05, 2016 - 02:57 AM UTC

Quoted Text


Quoted Text

While these look perfectly well formed, the fact that you can get about 150 Grandt Line or Tichy Trains rivets, in styrene, for $2.50-$3.50 makes resin rivets a bit expensive for larger projects.

That these are resin also means that you _must_ use either CA or epoxy to secure them to all models, whereas the styrene Grandt or Tichy rivets can be attached to styrene kits or scratchbuilt components with your favourite liquid cement. Frankly that's more than enough reason to not use resin rivets or bolts without the monetary inducement.

If you like resin rivets, I'm sure these are a fine product, but there are other rivets out there that have significantly more utility and are cheaper to boot.

Paul



Many of the Grandt-line bolts and rivets I bought years ago had the heads off-centered from the shaft but maybe they have improved since then .....
It's a riveting topic though ....

Grand Line has rivets in three sizes:
0.032, 0.043 & 0.063 inches (that's 0.81, 1.09 and 1.6 mm for you fans of the metric system out there)

Plus Models have sizes 0.5, 0.6, 0,7, 0.8, 0.9, 1.0, 1.2 and 1.4 mm.

Tichy Trains have the inch-sizes: 0.020, 0.025, 0.030, 0.035, 0.04, 0.05, 0.06, 0.07 and 0.08 (multiply with 25.4 to get the mm sizes)

Depending on the size you need you may need to choose the approriate manufacturer ...

/ Robin



Masterclub has spherical, spherical flat, flat and two types of conical rivets ranging in size from 0.4 to 1.8 mm in 0.1 mm increments. Depending on size, you get 100-200+ for a paltry $2.35 per pack. That's a whole lotta rivets, man.

Oh, they're resin, btw.
 _GOTOTOP